Table of Contents
Advertisement
4.6
Settings
4.6.1
Log
The commands are sent and received to the VoE-IOBox via "TCP-IP". The correct IP address
as well as the correct port must be entered.
All commands are sent in plain text (ASCII). Values begin with an angle bracket and end with
an angle bracket. Values are sent as decimal values in plain text (ASCII). If a command is not
understood or is wrong, the module sends "ENR<X>".
1. Example (read out limit values of the outputs):
Command to read: RCRL1 (1 to 4 are the outputs of the VoE-IOBox)
2. Example (read error):
Command to read: ERR (Result 99 = over-current)
Technisches Handbuch
Version 5.2
Technical data
12
Advertisement
Table of Contents
