Vision tools 09V0002B Technical Manual page 19

OUTP2<x,xxx>
OUTP3<x,xxx>
OUTP4<x,xxx>
OUT0 Simultaneous switching of the outputs OUT1...4
Write:
OUT0<OUT1,OUT2,OUT3,OUT4>
_OUT0< OUT1,OUT2,OUT3,OUT4>
OUT0<0.X.1,0.X.1,0.X.1,0.X.1>
OUTP0 Simultaneous switching of outputs OUT1...4 with PWM value
Write:
OUTP0<OUT1,PWM1,OUT2,PWM2,OUT3,PWM3,OUT4,PWM4>
_OUTP0<OUT1,PWM1,OUT2,PWM2,OUT3,PWM3,OUT4,PWM4>
OUTP0<0.X.1,0..100,..
..,0.X.1,0..100>
OUTP0<0.X.1,0..100,..
..,0.X.1,0..100>
Technisches Handbuch
Version 5.2
see OUTP1<x,xxx>
see OUTP1<x,xxx>
see OUTP1<x,xxx>
0 = Switches OUTx off
with CFO1<0,xxxx> Output OUT1.24 is switched off and
the PWM signal at output OUT1.PWM is stopped.
with CFO1<1,xxxx> the PWM signal is stopped at Output
OUT1.24.
1 = Switches OUTx on
with CFO1<0,xxxx> Output OUT1.24 is switched on and
the PWM signal at Output OUT1.PWM is output.
with CFO1<1,xxxx> the PWM signal is output at Output
OUT1.24.
X = no change at OUTx
0 = Switches OUTx off
with CFO1<0,xxxx> Output OUT1.24 is switched off and the PWM
signal at output OUT1.PWM is stopped.
with CFO1<1,xxxx> the PWM signal is stopped at Output OUT1.24.
1 = Switches OUTx on
with CFO1<0,xxxx> Output OUT1.24 is switched on and the PWM
signal at Output OUT1.PWM is output.
with CFO1<1,xxxx> the PWM signal is output at Output OUT1.24.
X = no change at OUTx
0..100% Brightness for OUTx.
Technical data
Answer: none
Answer: „ACK"
Answer: none
Answer: „ACK"
17