Camera Introduction; Camera Connection Diagram - Reolink RLC-423 Operational Instruction

Camera Introduction

SD Card Slot
Metal Aluminum Case
Infrared Lights
Lens
Daylight Sensor
Waterproof Lid
Network Cable
Earth Wire
Reset Button
*Press and hold for 10seconds to restore camera to
factory settings.
Power Port(Optional)
Audio in
3 English

Camera Connection Diagram

Before using the camera, please connect your camera as instructed
below to finish initial setup.
1. Connect the camera to a LAN port on your router with an Ethernet
cable.
2. Power on the camera with a power adapter.
PoE PTZ Camera
Router
Network Cable
*You may also connect the camera to a PoE Switch/Injector or Reolink
PoE NVR.
Power Adapter
Power Cable
English 4