Technical Features; Description Of Appliances - Bartscher 900 K4 Series Installation, Use And Maintenance Manual

Low-built gas and electric griddle plates

Hide thumbs

Table of Contents

Available languages

For the installer



The functioning of the appliance must be explained and shown to the user. After having ensured

that everything is clear, the instruction booklet must be handed over.

 The user has to be informed that any building modification or restructuring that may in any way

modify the air supply necessary for combustion makes it necessary to carry out another check of

the functionality of the appliance. In particular, every variation (additional power) in the

appliances in the room may modify the balance of the gas supply in the room. That means that

appliances may be fed with gas at lower gas pressure and rate than those provided for and they

may give worse performance.

The following instructions for set up and functioning refer to gas and mixed appliances belonging to

categories I

, II

3B/P

2H3+

(G30- G31) of 30/37 mbar, for Natural gas (G20- G25) of 20/25 mbar. The data plate (fig. 5, 6 –

page 4) with all the information to refer to regarding the appliance is situated inside the right or left

side of the control panel, depending on the model.

The appliances have been checked in accordance with the European directives below.

2014/35/UE

- Low Tension (LVD)

2014/30/UE

- Electromagnetic Compatibility (EMC)

2006/42/EC

- Machinery directive

2011/65/CE

- Rohs

2009/42/CE

- Gas Appliances

And the particular reference norms.

Declaration of compliance

The manufacturer declares that the appliances of their production are compliant with the above

mentioned EEC directives and requires that installation be done observing the norms in force,

regarding particularly the system for letting out fumes and air exchange.

Gas fry-top

Sturdy structure in steel placed on four feet which make it possible to regulate the height in the

version with cabinet. The outside finishing is in stainless steel.

It is provided with a thermostatic safety gas tap which enables the regulation of the temperature in a

range from 150° C inclusive to 325° inclusive; safety is ensured by means of a thermocouple which

is kept active by the flame of the pilot burner. The 800 wide versions are provided with two

separate cooking areas, with independent temperature regulating controls.

The hotplate is in thick stainless steel. The chamber is heated by means of a Chromium-plated steel

tubular burner, suitable for proper functioning at the high temperatures to which it is exposed. For

some versions is a plate of compound foreseen.