Steelcase Tableau-Powerwall Assembly Directions page 3

3.
Attaching screws to an adjacent unit
Using four (4) #8 pan head screws 1-1/4"
long, attach power wall to adjacent upper unit
using the four (4) pre-drilled holes on the
power wall. Using six (6) #8 pan head
screws 1-1/4" long, attach power wall to
adjacent unit using the six (6) pre-drilled
holes on the power wall.
NOTE: To tighten screws, use an angle drill.
Attaching screws to an adjacent unit
Steelcase
Page 3 of 6
Y9501888