Cushion Forward/Backward Adjustment; Armrest Inclination Adjustment; Backrest Inclination Adjustment; Side Support Adjustment - Ford F-MAX User Manual

Table of Contents

Advertisement

Cushion forward/backward adjustment

Pull the button in front of the seat
upwards to adjust the cushion forward/
backward. Desired position may be
achieved buy pushing the cushion forward
or backward at the same time.
Armrests
Armrests can be raised when required.

Armrest inclination adjustment

The inclination of armrests on the fore-aft
direction may be changed by rotating the
wheel.
Inclination of the armrest is increased
upwards when the wheel is rotated
outwards, and reduced downwards when
the wheel is rotated inwards.
CAUTION
Do not use the armrests to climb up the
upper bed.
Heater
Electrical heaters on the backrest and
seat cushion are operated in two steps by
pressing the seat heater switch.
WARNING
It is recommended that persons who
cannot feel increasing temperature shall
not use the heater function as it shall
cause various injuries and health issues.

Backrest inclination adjustment

Press and hold the button to perform
backrest inclination adjustment. Backrest
may be adjusted to the desired position
by moving it forward or backward at the
same time. Release the button again to
lock it.
Lumbar adjustment
By moving the buttons up or down, you
may adjust the upper and lower lumbar
supports to the person.
- 69 -
OPERATION
Seats and Beds
Air chambers are fi lled when the
mentioned buttons are moved up, and
discharged when the buttons are moved
down.
If the back cushion does not continue
to infl ate when the buttons are moved
up, this means that you have reached
the maximum setting in lumbar support
adjustment.

Side support adjustment

By moving the button up or down, you
may adjust the curve setting of the side
cushions to the person.
Air chambers are fi lled when the
mentioned button is moved up, and
discharged when the button is moved
down.
If the side cushions do not continue
to infl ate when the button is moved
up, this means that you have reached
the maximum setting in side support
adjustment.
4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents