Screen Warning And Error Warnings - Ford F-MAX User Manual

Screen warning and error warnings...

SYMBOL WARNING
Drive at constant speed
for DPF regeneration.
Perform exhaust cleaning
when parked for exhaust
system efficiency (with
the button).
Exhaust filter is too full.
Reset manual inhibition
when possible.
DPF regeneration is
active. Remaining: X
min.
Regeneration can not be
activated. Conditions
are not met.
The exhaust filter could
not be cleaned while
driving.
DPF regeneration
inhibition is set by
driver.
The exhaust is cleaned
with high temperature
gas. Pay
attention to the vehicle
environment.
Poor Urea Quality. Use high
quality urea for exhaust
system efficiency.
CONTROLS AND INDICATORS
Exhaust smut fi lter saturation is above the expected level. This might be caused by the style of driving or the driving time. For the vehicle
to be able to conduct automatic fi lter cleaning, it is advised that you drive the vehicle with a fi xed speed above 30kph when you see the
green exhaust fi lter cleaning symbol. If the road conditions are not suitable, it is recommended to perform manual exhaust fi lter cleaning.
Exhaust smut fi lter is fi lled to the extent that the vehicle cannot perform automatic cleaning. In this case; park the vehicle to a safe
location and make sure that the vehicle is not in contact with any fl ammable material, and then perform manual cleaning using the
manual cleaning button. You can fi nd manual cleaning conditions in the manual exhaust fi lter cleaning section.
Exhaust fi lter started to fi ll up excessively while the manual exhaust fi lter cleaning prevention is active. It is recommended that you lift
the exhaust fi lter cleaning prevention before the fi lter is overloaded or allow manual fi lter cleaning. You can remove the fi lter cleaning
prevention by keeping the fi lter cleaning prevention button for 3 seconds or by restarting the engine aft er turning off the ignition.
Manual exhaust fi lter cleaning is active During exhaust fi lter cleaning, the exhaust gas temperature is increased to burn the soot inside the
exhaust fi lter. Time remaining to the end of operation is shown in minutes.
Conditions are not suitable for manual exhaust fi lter cleaning. In this case, you have to ensure that the conditions written in the manual
Exhaust fi lter cleaning prevention is activated by the driver. You can activate the exhaust fi lter cleaning prevention while loading
hazardous materials or while driving the vehicle in an environment with fl ammable materials like grass, hay, petroleum products etc.
Please keep in mind that the exhaust fi lter will be damaged in long blocking durations.
This warning is for the purpose of informing the driver. Exhaust gas temperature is high due to driving under heavy load or exhaust
fi lter cleaning. This warning is activated when the exhaust gas temperature is high and the vehicle speed is low. It is normal to see this
warning during exhaust fi lter cleaning. When the warning is active, please ensure that the vehicle and exhaust fumes are not in the same
environment as fl ammable materials like grass, hay, petroleum products etc. and that the vehicle is not in an enclosed area. Otherwise,
Material not conforming to ISO22241-1 standards detected in urea tank. Drain the urea tank and add urea that conforms to the standards.
Resolve the problem as soon as possible to prevent power cut off .
WARNING DESCIRPTION
Exhaust filter is too full.
Press the button for exhaust cleaning when parked.
exhaust fi lter cleaning section are met
The exhaust filter could not be cleaned while driving.
Clean the exhaust when parked.
fi re risk may occur!
- 19 -
Instrument Panel
3