Advertisement
Edge grinding
The removable brush segment allows you to reduce the distance between the wall/ceiling and the side
of the sanding pad.
Press the two hooks of the brush segment (5-1) and push them down.
Remove the brush segment (5-1).
360° turning circle (5-2), polishes in all directions
Suction power adjustable with the suction regulator (5-3)
Dust extraction
Inhaling dust can damage the airways.
Always connect the device to a vacuum cleaner.
When performing work that generates dust, always wear a dust mask.
LED lighting
If you are working in a place where there is insufficient lighting, you can turn on the LED lights.
Press the LED button (2-3).
LED (2-4) suitable for grinding work.
Grinding work
Turn motor head 90°, lock handwheel (3-3) to fix it, light polishing of the top.
Operation
Warning!
Risk of injury
Do not hold the machine by its head.
Hold the machine firmly with both hands.
Connect the machine to the power supply. Hold the grinding head a little away from the work
surface before switching it on.
Switch on the machine. The on/off switch has a zero-voltage drive that prevents the machine
from starting automatically after an interruption in the power supply (e. g. after a power fail-
ure). After a power failure, press the on/off switch (2-1) to switch on the machine.
Perform the necessary grinding work. Do not overload the machine by using too much force.
The best results are achieved with medium pressure.
The grinding performance and quality essentially depends on the choice of the right abrasive
and on the fact that the holes in the grinding disc match the suction holes (4-3). Tear off the
grinding disc when worn.
Repair and maintenance
Warning!
Risk of accident and electric shock
Always pull the plug out of the socket before doing any work on the machine.
All maintenance and repair work in which the motor housing has to be opened may only be
carried out by an authorized specialist.
Check the power adapter and plug regularly. If one of the two is damaged, it must be replaced
by a specialist.
To ensure constant air circulation, always keep the ventilation slots in the motor housing clean
and free from blockages.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 62531
Page 10
01
2021-1
Advertisement
