Check Engine Lamp (Celp) - KYMCO Movie S 125i Service Manual

5. Fi INJECTION SYSTEM

CHECK ENGINE LAMP (CELP)

When turning on the switch, the lamp
will be lighted for two seconds then off.
Let user to know the lamp is available
and connect to ECU.
If the CELP starts to blink or keep
lighting, could see the DTC on the time
area of speedometer.
wrong with this vehicle, you had better to
do the further check to find out the
failure code to know which part get
trouble
There are three kinds of priority grade,
let user to know what kind of trouble was
happened.
Priority grade
continuously. This is the most emergent
situation like engine over heat. User
should slowdown the riding and go to
dealer for checking immediately.
Priority grade 2: CELP lights all the time.
It means components gets trouble or
circuit something wrong. Do the further
check to find out the failure code to
know which part get trouble.
Priority grade 3: CELP just blinks once
suddenly and
sometimes just warning like the RPM
was too high in a short term.
5-5
It means something
1: CELP blinks
then disappear. It
CELP (Check Engine Lamp)
DTC (Defect Trouble Code)
MOVIE S 125i