Safety Precautions - Mitsubishi Electric CC-Link-AnyWire Bitty Bridge User Manual

Before using this product, please read this manual and the relevant manuals carefully and pay full attention
to safety to handle the product correctly.
The precautions given in this manual are concerned with this product only. For the safety precautions of the
programmable controller system, refer to the user's manual for the CPU module used.
In this manual, the safety precautions are classified into two levels: "
WARNING
CAUTION
Under some circumstances, failure to observe the precautions given under "
serious consequences.
Observe the precautions of both levels because they are important for personal and system safety.
Make sure that the end users read this manual and then keep the manual in a safe place for future
reference.
[Design Precautions]
● An AnyWire Bitty system has no control function for ensuring safety.
● When a communication failure occurs in the network, data in the master module are held. Check the
communication status information and configure an interlock circuit in the sequence program to
ensure that the entire system will operate safely.
[Design Precautions]
● Do not install the control lines or communication cables together with the main circuit lines or power
cables. Keep a distance of 100mm or more between them. Failure to do so may result in malfunction
due to noise.
● Configure safety circuits, such as an emergency stop circuit and interlock circuit, external to the
AnyWire Bitty system.
2

SAFETY PRECAUTIONS

(Read these precautions before using this product.)
Indicates that incorrect handling may cause hazardous conditions,
resulting in death or severe injury.
Indicates that incorrect handling may cause hazardous conditions,
resulting in minor or moderate injury or property damage.
WARNING
CAUTION
WARNING" and " CAUTION".
CAUTION" may lead to