Table of Contents
Advertisement
5. Confirm the
Line Type
6. Confirm the
Switch Type
7. Confirm the Dialogic fax board's Range of Extensions settings correspond to the number of DNIS
digits your organization uses to identify line extensions. The default range of extensions is set to 0000
for Lowest Extension and 9999 for Highest Extension. If your organization uses 4 DNIS digits to
identify line extensions, leave the default at 0000 and 9999. If your organization uses 3 DNIS digits to
identify line extensions, change the settings to 000 for Lowest Extension and 999 for Highest
Extension. If your organization uses 5 DNIS digits to identify line extensions, change the settings to
00000 for Lowest Extension and 99999 for Highest Extension.
8. To implement any extension range changes, select
will re-scan the board and save the new configuration.
Manager
9. Reboot the FaxPress Enterprise Redundant to restart the
service.
Configuring the FaxPress Enterprise Redundant for T1 PRI/T1 ISDN PRI
To support T1 PRI/T1 ISDN PRI, the Dialogic fax board's default Switch Type will need to be reconfigured.
The fax board's range of line extensions (see
for more info) may also require modifying.
Settings on page 23
To modify the Dialogic fax board settings and range of extensions, follow these steps:
1. Disable channel 24 in the FaxPress Enterprise Redundant's Line Settings. Use the Web Client if the
FaxPress Plus client is not already installed. The FaxPress Enterprise Redundant will still display 24
channels in FaxPress Plus, but channel 24 will be disabled. See the
Administrator Guide
Settings.
2. Attach a mouse, keyboard, and monitor to the FaxPress Enterprise Redundant, or use Remote Desktop
Connection.
3. Power on the FaxPress Enterprise Redundant.
4. Log into the FaxPress Enterprise Redundant system as
. Make sure
castelle
Local Administrator Account on page 11
5. Open the
Services
6. Stop the
Castelle FaxPress Eicon Fax Board Driver
field displays
T1 Line (24 channels)
is
USA, RBS T1 (Robbed Bit Signaling)
About the Dialogic Fax Board's Range of Extensions
for more information on using the Web Client and configuring the Line
is all lower case. (See
castelle
tool. (
Start>Settings>Control Panel>Administrative Tools>Services
FaxPress Enterprise Redundant T1 Line Types and Signaling
.
. The
File>Activate
Castelle FaxPress Eicon Board Driver
Administrator
Important! The FaxPress Enterprise Redundant
for more information.)
service.
.
Diva Server Configuration
FaxPress Enterprise Redundant
. The default password is
.)
21
Advertisement
Table of Contents
