Table of Contents
Advertisement
FaxPress Enterprise Redundant Getting Started Guide
Required Setup Procedures
Setting up the FaxPress Enterprise Redundant server for basic operation involves these required steps:
1. Connecting the FaxPress Enterprise Redundant to the network and phone system. (See
the FaxPress Enterprise Redundant to the Network on page 16
2. Powering on the Enterprise Redundant. (See
Server on page 17
3. Manually assigning the FaxPress Enterprise Redundant two static IP addresses. (See
IP Addresses on page 18
4. Configuring the FaxPress Enterprise Redundant's Dialogic fax board. (See
Redundant T1 Line Types and Signaling on page 19
ISDN PRI (Primary Rate Interface) on page 23
BRI (Basic Rate Interface) on page 26
5. Joining the fax server to the network domain. Joining the FaxPress Enterprise Redundant to the
network domain is required to import users from Active Directory with the FaxPress Active Directory
Synchronizer. (See
Administrator Guide.) This procedure applies only to Microsoft Windows networks.
6. Taking necessary antivirus and security measures. (See
Software on page 13
7. Installing the applications required for attachment conversion. To use the e-mail Gateways or to use
the Drop Directory for production faxing, you'll need to install any applications, such as the Microsoft
Office suite, used frequently by your users. See
Service on page 37
8. Installing the FaxPress Plus client on a network workstation. The FaxPress Plus client is the
Windows-based administration and fax transaction utility. (See
the Administrator Guide.) Logged on to FaxPress Plus as Administrator, you'll use FaxPress Plus to
configure the FaxPress Enterprise Redundant fax server, and to create and configure users. If you use
the Web Client Interface to configure the fax server and users, installing the FaxPress Plus client is
not immediately required.
9. Activating the FaxPress Plus software with the Software Activation Key. (See
Plus, the FaxPress Enterprise Redundant Client Software on page 29
10. Configuring the FaxPress Enterprise Redundant Line Settings, Dialing Properties, E-mail settings, and
DNIS settings using FaxPress Plus. (See
in the Administrator Guide.)
Redundant
11. Sending and receiving a test fax using one of the three generic, pre-created user accounts
(Administrator, Guest and Unaddressed) to confirm the FaxPress Enterprise Redundant server is
operational. (See
10
.)
.)
.)
Importing and Mapping Users
.)
for details.
in the FaxPress Enterprise Redundant Administrator Guide.)
Sending a Test Fax
Powering On the FaxPress Enterprise Redundant
,
FaxPress Enterprise Redundant E1 and E1
or
FaxPress Enterprise Redundant ISDN and ISDN
in the FaxPress Enterprise Redundant
Network Security/Installing Antivirus
Installing Applications for the File Conversion
Installing the Administrator Client
Chapter 5, Configuring the FaxPress Enterprise
Connecting
.)
Assigning Static
FaxPress Enterprise
Activating FaxPress
in this manual.)
in
Advertisement
Table of Contents
