Call Waiting Caller Id; Reviewing And Deleting Stored Caller Id Records; Toll Call Indicator; Caller Id With Auto Attendant On - Casio SA-400 Owner's Manual

CALL WAITING CALLER ID

REVIEWING AND DELETING STORED CALLER ID RECORDS

The SA-400 will store up to 64 of your most recent caller ID records. Any received caller ID
information (name, telephone number, date and time) is stored for your reference, depending on
your station setting of ALL, ANSWER or UNANSWER (see page 22). Caller ID records are stored
in reverse order of time and date. If memory becomes full, the newest entry will be saved and the
oldest record erased.
To review caller ID records,
1.
Press . The most recent caller ID record will appear in the display.
CALLER ID
2. >
Press the button to scroll through the oldest records.
3. <
Press the button to scroll through the newest records.
4.
Press the DEL button to delete the current record. Select "
to delete all saved records, or " " to abort and save.

TOLL CALL INDICATOR

A follows a caller ID record to indicate that a message is outside your area code and if you
press to call the caller back, the call may result in toll charges.
DIAL

CALLER ID WITH AUTO ATTENDANT ON

When auto attendant is turned on and a call is received, all common line stations will display the
calls caller ID record. However, the caller ID record will not be retained in the unit's directory
unless the call is directed to your station.

CALLER ID LINK

When a call is transferred from one station to another, that call's caller ID data is also transferred.
The most recently received caller ID record will be transferred with the call.
" to delete this record, "
40

ADDITIONAL INFORMATION

WALL MOUNTING PEDESTAL

The SA-400 can easily be wall mounted by following these instructions.
1.
Install two screws into the wall using the template, on this page, as
a guide.
NOTE:
Purchase wood screws, round head, brass, size #10, 1 ¼ inch in length.
2.
Remove the mounting pedestal from the desk mount position.
3.
Thread the AC adapter cord and line cords through channels on the
bottom of the SA-400.
4.
Snap the pedestal bracket, with the narrow end of the wedge
pointing upward, into the bottom four wall mount ports and push
"
up to lock in place.
5.
Attach the telephone to the wall.

DESK TOP PEDESTAL

1.
Remove the mounting pedestal from the
desk mount position.
2.
Thread the AC adapter cord and line cords
through channels on the bottom of the
SA-400.
3.
Snap the pedestal bracket, with the narrow
end of the wedge pointing downward, into
the top four wall mount ports and push up
to lock in place.
4.
Place the telephone on the desk.
41