INITIAL SETUP 2 2 2 2 2 INSTALLATION CONNECT the AC Adapter Plug into the AC Adapter Outlet on the back of the CP-725 charging LOOP cradle. the cord through the AC Adapter Cord Holder to prevent accidental disconnection. PLUG the AC Adapter into an electrical wall outlet.
Fully extend the charging cradle antenna for clear reception. TONE/PULSE SWITCH This switch tells the CP-725 to dial out with either touchtone or pulse signals to match the service you have with your local telephone company. The CP-725 is shipped with the...
If the product has been dropped or the cabinet has been damaged. If the product exhibits a distinct change in performance. Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote risk of electric shock from lightning.
The Digital Security Coding System automatically resets a new personal security code to one of 256 combinations every time you return the CP-725 handset to the charging cradle. (Whenever the handset is returned to the charging cradle you will hear a beep confirming that a new security code has been set.) The security code prevents unauthorized use of your telephone line, false rings, and false dialing.
Local Area Code Setting If you are planning to use the Caller ID features on the CP-725, be sure to program your local area code into the handset's memory after you have charged the batteries for the first time. The CP-725...
HANDSET / TELEPHONE OPERATION STANDBY MODE The CP-725 is in "Standby" mode whenever it is idle, waiting for a call. If the handset is in the charging cradle, the display will either show the ringer status, for example: RINGER IS ON If you have new caller ID entries from recent unanswered calls, it will show the "New Callers"...
NOTE: The length of time shown on the display is intended only to be an estimate duration of a phone call. CASIO PHONEMATE makes no guarantees regarding the accuracy of this timer.
BATTERY FLASH HOLD CHANGING CHANNELS PAUSE After selects the best of 25 available channels in your area. If you hear noise or interference while using the CP-725, press change channels. NAME/DATE FLASH/CALL WAITING SEND LAST CALL TIME DISPLAY RIGHT ARROW (NAME/...
Send-Key Dialing is extremely reliable because you can see the number you have entered before actually dialing it. Make sure the CP-725 is in "Standby Mode". Without pressing the button, enter the number you wish to dial. If you make a mistake, use DELETE to make changes.
OPERATION REDIAL The CP-725 remembers the last number you dialed. The redial memory will hold up to 16 digits. Every time you dial a new telephone number, the redial memory is updated with that new number. TALK Press and wait for a dial tone.
"Low Battery" display will appear: If the Low Battery indicator appears while you are talking on the CP-725, you may only have a few minutes left before the battery discharges completely, in which case you will be discon- nected.
ANSWERING CALLER ID CALLS When you receive a call, the CP-725 will receive the Caller ID information from your phone company within the first two rings. When all of the data is received, you will...
If you subscribe to a Call Waiting Caller ID service with your telephone company, the CP-725 can receive a Caller ID call while you are on the line with another party. If a second call comes while you are on the phone, your CP-725 will beep.
SAVING CALLER ID INFORMATION The CP-725 automatically saves up to 25 Caller ID entries. Any Caller ID information (name, phone number, date, time) that is transmitted will be stored for your reference or use in the autodialer and redial memory.
SEND NOTE: Be sure that you have programmed your local area code into the CP-725 before using this feature. See "Programming the CP-725" (page 25) for more information. DIALING STORED CALLER ID...
Call Waiting Caller ID information. Although no Caller ID data will show up on the display, the CP-725 may mute the phone line for a second or so. To prevent this annoyance, simply make sure that the Call Waiting Caller ID program option is set to "OFF".
DOWN UP ARROW Press the to locate a memory location. CALLER ID Enter a telephone number on the keypad. Press the the cursor to the name field. Enter the name using the keypad. Pressing a key once displays the first upper case letter on that key.
UP ARROW Press the to select an autodial number. CALLER ID When you locate the number, press SEND to dial it. The CP-725 will automatically dial the number on the display. PAGE 19 19 19 19 19 key can be...
For example, if you know that the name and number of the person you are calling are stored in autodial 06. AUTO Just press , " ", CP-725 will then establish a dial tone and dial the number. AUTO DELETE EDITING AUTODIAL ENTRIES PROGRAM...
ERASING AUTODIAL NAMES AND NUMBERS To erase numbers in autodial, press AUTO AUTO DELETE DOWN UP ARROW Press the to find the autodial number you wish to erase: CALLER ID Donna West A19 310 555 3434 DELETE. Press and release following display will appear: AUTO DELETE...
PAGE AUTODIAL 22 22 22 22 22 TRANSFER CALLER ID TO AUTODIAL MEMORY This feature allows you to transfer a phone number from Caller ID memory directly into the Autodial Memory. This saves you time and eliminates the chance of entering an incorrect phone number into memory.
TRANSFER REDIAL NUMBER TO AUTODIAL MEMORY This feature allows you to transfer a phone number from the Redial Memory directly into the Autodial Memory. If you wish, you can add a name before you complete the transfer. PROGRAM Press . The "Program Mode"...
REDIAL CHANNEL TONE OPER BATTERY PROGRAM NAME/DATE AUTO DELETE CALLER ID 25 CHANNEL You can set the ringer of the CP-725 to ON or OFF. BATTERY HOLD PAUSE SEND PROGRAM OPTION 1: RINGER ON/OFF PROGRAM Press . The "Program Mode" display will flash:...
IMPORTANT NOTE: If you change the Outside Line option, you must re-program the Local Area Code setting before you return the handset to the charging cradle in order for the CP-725 to function properly. PAGE 25 25 25 25 25...
If your telephone system requires that you enter an extra digit in order to obtain an outside line, the CP-725 can dial this digit for you automati- cally whenever you dial a stored Caller ID number. This may be useful if you use your CP-725 at a business that uses a PBX telephone system.
PROGRAM OPTION 7: ON-SCREEN HELP Two modes of on-screen help are available while you program the CP-725. These are: 1. Automatic Help A help message will automatically scroll across the screen whenever you wait 15 seconds without pressing a key. If you do not...
CHARGING LINE IN-USE INDICATOR LINE-IN-USE INDICATOR (located on the charging cradle) will light whenever the CP-725 is in "TALK" mode. It will also light whenever any other extension telephone on the same line is being used. LINE IN USE NO TELEPHONE LINE...
INSTALLATION Two-line installations may require a two-line T-adapter for the CP-725 to operate correctly. The T-adapter allows you to connect your machine to Line 1 or Line 2. The CP-725 will only answer one line. (See accessories, page 35) MULTI-LINE...
PAGE BATTERY INSTALLATION 30 30 30 30 30 HANDSET BATTERY INSTALLATION THIS UNIT IS SHIPPED WITH THE HANDSET BATTERY PACK INSTALLED. If it becomes necessary to replace the battery pack: Press down on the battery compartment cover and slide it toward the bottom of the handset.
Canada. Subject to the following conditions, should this product prove defective by reason of improper workmanship of material: During the period of one (1) year from the date of original purchase, CASIO PHONEMATE will repair or, at its option, replace the product without charge for parts or labor. If CASIO PHONEMATE elects to replace the product, such replacement may be accomplished with a factory-reconditioned unit.
UNAVAILABLE # UNAVAILABLE Again, the time and date information for the call will still be recorded into the CP-725's memory. Local Area Code Setting The CP-725 can make returning phone calls easier by automatically dialing stored Caller ID numbers.
Page 33
After several attempts the CP-725 will not operate properly. Unplug the AC ADAPTER PLUG from the back of the CP-725 for 10 seconds. Remove the batteries from the handset. Plug the AC ADAPTER back into the charging cradle and re- insert the batteries in the handset.
TV or VCR; and, if interference is experienced, moving the cordless telephone farther away from the TV or VCR will often reduce or eliminate the interference. Any changes made by the user not approved by CASIO PHONEMATE can void the user’s authority to operate the equipment.
ACCESSORIES To order accessories for your CP-725 cordless telephone, simply cut out this order form, fill in the appropriate information and send it with payment (check, money order or credit card information) to: CASIO PHONEMATE Parts Department Description Lightning Arrestor - Helps protect telephone devices from damage caused by lightning strikes to the telephone line.
Switch Settings ... 3 Tone/Pulse Switch ... 3 Ringer On/Off ... 3 Safety Instructions ... 4 Cordless Telephone Information ... 5 Important CP-725 Information ... 6 HANDSET / TELEPHONE OPERATION Standby Mode ... 7 To Place A Call ... 7 To End A Call ...
Base Unit: 12V DC, 150mA (M/N-14) Battery Life Standby: 7 days Talk: 6 hours Recharging Time: 12-15 hours The CP-725 is hearing aid compatible. Design and specifications subject to change without notice. CASIO PHONEMATE, INC. 20665 Manhattan Place Torrance CA 90501 Internet web site address: http://www.CASIOPHONEMATE.com...
Page 38
PAGE 38 38 38 38 38 EASY TO USE OWNER'S GUIDE CP-725 CORDLESS TELEPHONE WITH CALLER ID/ CALL WAITING DISPLAY...