Answering A Call On Another Line During A Conversation; Answering A Call Waiting Caller Id Call; Making Calls; Memory Storage - Casio SI-460 User Manual

TELEPHONE OPERATION
ANSWERING CALLS

ANSWERING A CALL ON ANOTHER LINE DURING A CONVERSATION

When you are speaking with a caller on an outside line and another call is received on another
line, you will not hear other incoming calls ring on your phone unless you set your phone to
"ALWAYS RING". See page 18. To answer the other call,
1.
HOLD
Press to place the caller you are speaking with on hold. The LINE button of the call
PAUSE
you place on hold will flash green.
2.
Press the LINE button of the ringing call and begin speaking with the caller. The LINE
INDICATOR will turn from a flashing red to a solid green.
3.
To return to the first caller on hold and hang up with the second call, press the LINE button of
the holding call. The second line will automatically be disconnected.
4.
Begin speaking with the first caller who has been released from hold.

ANSWERING A CALL WAITING CALLER ID CALL

If you subscribe to a call waiting caller ID service from your local telephone company, the
SI-460 can receive a caller ID record while you are on the line with another party.
1.
If a second call comes in while you are on the phone you will hear a beep.
2.
The caller ID data of the caller will appear in the display.
3.
Press if you want to answer the call waiting call or ignore the second call and
FLASH
continue with the first call.
NOTE:
Call waiting caller ID can be seen on the auto attendant station, a station will only receive call waiting caller ID
information if they are off hook on a line and another call comes in on that line.

MAKING CALLS

The SI-460 enables users three ways to get a dial tone and hang up:
Method Getting a Dial Tone
Handset Lift the handset.
Headset Press
HEADSET
ANSWER
Speakerphone Press
SPEAKER
The owner's guide primarily uses examples using the handset to operate features and functions.
However, the headset and speakerphone may also be used. Please refer to the chart above.
(cont.)
Hang Up
Return the handset to the cradle.
. Press .
HEADSET
ANSWER
. Press .
SPEAKER
38
TELEPHONE OPERATION

MEMORY STORAGE

MAKING A CALL USING CALLER ID

To make a call using caller ID records:
1.
Press .
CALLER ID
2. < >
Press the or display soft key to scroll through records.
3.
Lift the handset.
4.
When the caller record you want to dial appears on the display, press
5.
If your area code is set to 000 in the SI-460, the LCD will display three different dialing
options. The options are to dial 7 digits, 10 digits or all digits of the telephone number.
Select one of the three dialing options and press
establish a dial tone and place the call.
6.
Return the handset to the cradle to end the call.
NOTES:
If you have programmed your local area code into the SI-460 before using this feature, then the SI-460 will not
prompt you for different dialing options. See "Setting the Area Code" on page 16.
If you wish to cancel your call (to exit dialing mode) press

DISPLAY REDIAL

This feature allows you to view the contents of redial memory before dialing the number. This
feature is useful when you are not sure what number was dialed last.
1.
While on-hook, press .

REDIAL

AUTO REDIAL
2.
The telephone number that was dialed last will display in the LCD for you to review.
If you want to dial the number displayed,
1.
Lift the handset.
2.
Press .
DIAL
3.
End the call by returning the handset to the cradle.
REDIAL
The SI-460 remembers the last number dialed and will automatically redial that number.
1.
Pickup the handset.
2.
Press . The last number dialed will appear in the display and the SI-460 will
REDIAL
AUTO REDIAL
automatically redial the number.
3.
Return the handset to the cradle to end the call.
.
DIAL
again. The SI-460 will automatically
DIAL
.
CALLER ID
39