Packing List; System Defaults; Display & Led Indication; Buttons & Indicators - Casio SA-400 Owner's Manual

INITIAL SETUP

PACKING LIST

Telephone Base
Handset
Coiled Handset Cord
Owner's Guide
Quick Guide
Two long RJ14 Telephone Cords
To purchase any of the items listed above, please see ACCESSORIES on page 52.

SYSTEM DEFAULTS

Once initial setup is complete, the SA-400 is ready to use with the following program defaults.
Programming each of the settings below needs to be done at each station:
PROGRAM FEATURE FACTORY PRESET SETTING
Area Code The area code is set to "000"
Auto Answer Auto Answer is ON for intercom use
Always Ring The default is OFF for Auto Attendant and for
incoming calls when you are already on a line
Call Waiting Caller ID Call Waiting Caller ID is set to ON and ALL,
so all caller ID records are retained
Default Ringer Volume The default ringer volume is set to HIGH
(on the back of the SA-400)
Eight Auto Intercom Keys The eight keys are programmed to intercom
stations 11-18
Flash Duration The flash duration is set to 600 MS
Outside Line The outside line is set to "-"
Ringer The ringer is ON for all installed lines
DISPLAY & LED INDICATION
BUTTONS & INDICATORS ACTION
Headset (Answer) Lights red
HEADSET
ANSWER
Intercom Lights red
INTERCOM
Lights red
Flashes red
Mute Displayed
Do Not Disturb Lights red
Speaker Lights red
Transfer Lights red
TRANSFER
Two short RJ14 line cords
AC Adapter
Mounting Pedestal
Spare Autodial Station Card
Spare Intercom Station Cards (set of 2)
REFERENCE PAGE
DESCRIPTION
When pressed to go off-hook using a
headset
During an all station page
When pressed to intercom another
station
When your station is being intercommed
and Auto Answer is turned off
When pressed to mute an intercom or
off-hook conversation
When activated
When the speakerphone is activated
When pressed to transfer a call
4
DISPLAY & LED INDICATION
LINE STATUS
INDICATOR
LINE 1
Off Line is available to use or
Unconnected line
Solid Red Private line is in use at another extension
Slow Flashing Red Call on hold at another station or privacy released call at another station
Rapid Flashing Red Line ringing
Rapid Flashing Green Call has been on hold at this station for over three minutes or call is
being transferred to another station
Slow Flashing Green Call has been placed on hold at this station for less than three minutes
Solid Green Line is in use at this station or
14
Station is participating in a conference call
13
15
STATION STATUS INDICATION (BUSY LAMP FIELD)
22
The SA-400 allows you to view the activity of all stations in the
15
system at a glance. When the station number icon displays on the
LCD, this indicates that this station is on an outside line, intercom
20
call, in Do Not Disturb mode or receiving a transferred call.
20
IMPORTANT SA-400 FEATURES
14
15
LIFETIME MEMORY PROTECTION
No batteries are required to maintain caller ID information and autodial names and numbers.
Non-volatile memory protects your entries in the event of a power failure.
SUPERTWIST NEMATIC (STN
Advanced technology in the SA-400 provides clear, multi-angle viewing of data on the large
display.
HELP TEXT
If a delay of over 15 seconds occurs during programming the station ID or setting the time and
date, help text will scroll across the display to assist you in programming.
CALL WAITING
The SA-400 supports call waiting caller ID, however, a subscription to call waiting, caller ID and
call waiting caller ID is required from your local telephone company to view caller ID records.
INITIAL SETUP
(cont.)
DESCRIPTION
TM ) LCD
5
11 12 13 14
AM
16 18
21