Pepperl+Fuchs OHV10-F228-R2 Manual page 16

OHV10-F228-R2
Configuration
Configuration Guide
general-reading-mode-
general-reading-mode-
general-reading-mode-
general-reading-mode-
general-reading-mode-
16
settings
Continuous Scan Mode On
settings
Disable Targeting-Always-On
settings
Enable Target LED During Image
Capture - Default
settings
Motion Detect or Continuous Scan
Off (Out of Stand) - Default
settings
Reader Raw Text Commands Off
- Default
Disable Cell Phone Reading Disable Target LED During Image
Enhancement - Default
Enable Cell Phone Reading
Enhancement
Enable Targeting-Always-On
Motion Detection On In Stand - No Scan Delay with Motion
Default
Reader Raw Text Commands On Set Motion Detect Maximum
Brightness to 100% - Default
Capture
Enable Stand Detection -
Default
Motion Detect Always On
Detection in stand