Installing Device Drivers - Pepperl+Fuchs OHV10-F228-R2 Manual

OHV10-F228-R2
Installation
Figure 3.4
The function indicator on the handheld reader lights up green. An RS-232 connection is
established.
The handheld reader uses the following RS-232 factory settings:
• 115,200 baud
• 8 data bits
• No parity
3.2

Installing Device Drivers

The handheld reader registers itself as an input device or keyboard. Special device drivers are
not needed.
The operating system automatically installs the drivers for input devices (Human Interface
Device).
RS-232 Connection
11