Advertisement
Transportation
Make sure the appropriate blade cover is in place.
•
When transporting by car fix the unit firmly using a rope, do not transport by bicycle or motor -
•
cycle because it is dangerous.
Never transport the brush cutter over rough roads over long distances without first removing
•
all fuel from the fuel tank, as doing so might cause fuel to leak from the tank.
Operation safety precautions
Grip the handles of the brush cutter firmly with both hands. If you sus-
•
pend the work, place the throttle into the idling position.
Always be sure to maintain a steady even posture while working.
•
Maintain the speed of the engine at the level required to perform cutting
•
work and never raise the speed of the engine above the level necessary.
If the grass gets caught in the blade during operation or if you need to
•
check the unit or refuel the tank always be sure to turn off the engine.
If the blade touches a hard object like a stone immediately stop the en-
•
gine and check if something is wrong with the blade. If so replace the
blade by new one.
If someone calls out while working always be sure to turn off the engine
•
before turning around.
Never touch the spark plug or plug cord while the engine is in operation.
•
It may result in being subjected to an electrical shock.
Never touch the muffler spark plug or other metallic parts of the engine
•
while the engine is in operation or immediately after shutting down the
engine. Doing so may result in serious burns.
When you finish cutting in one location and wish to continue work in an-
•
other spot turn off the engine and turn the unit as the blade faces away
from your body.
Maintenance safety precaution
Perform the maintenance and checking operations described in this manual at regular inter -
•
vals. If any parts must be replaced or any maintenance or repair work not described in this
manual must be performed please contact a representative from the store nearest authorized
servicing dealer for assistance.
Under no circumstances should you ever take apart the brush cutter or alter it in any way. Do-
•
ing so might result in the brush cutter becoming damaged during operation or the brush cutter
becoming unable to operate properly.
Always be sure to turn off the engine before performing any maintenance or checking proced-
•
ures.
When sharpening removing the blade with proper tools and equipment to prevent injury.
•
When replacing blade or any other parts or when replacing the oil or any lubricants always be
•
sure to use only products which have been certified by for use with the brush cutter.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
Item 61495, 61496
Page 8
02 2021-2
Advertisement
