Advertisement
Stopping the engine
1. Return the throttle lever to the idling position.
2. Push the engine switch button.
Equipping the shawl band (F12)
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
e) While holding the unit firmly pull out the starter rope
quickly (F11).
f) After the engine has started open the choke gradu-
ally.
g) Allow the engine to run for 2 to 3 min to warm up.
a) Equip the attached shawl band.
b) Turn on the engine return the throttle lever to the
lowest speed position and put the shawl band hook to
the hanging part of the machine.
c) Adjust the length of the shawl band so that the blade
may be parallel to the ground in the working position. In
order to prevent stack during operation turn up the ex-
tra part of the band from the buckle.
Item 61495, 61496
Page 13
02 2021-2
Advertisement
