Download Print this page

WilTec 61495 Operation Manual page 6

2 in 1 brush cutter
Hide thumbs Also See for 61495:

Advertisement

Working gear and clothing
Working considering handling of fuel
The engine of this product is designed to run on a mixed fuel which contains
highly flammable gasoline. Never store cans of fuel or refill the fuel tank in any
place where there is a boiler stove, wood fire, electrical sparks, welding
sparks, or any other source of heat or fire which might ignite the fuel.
Smoking while operating the product or refilling its fuel tank is extremely dan-
gerous. Always be sure to keep lit cigarettes away from the product at all
times.
When refilling the tank always turn off the engine first and take a careful look around to make
sure that there are no sparks or open flames anywhere nearby before refuelling.
If any fuel spillage occurs during refuelling, use a dry rag to wipe up spills before turning the
engine back on again.
After refuelling, screw the fuel cap back tightly onto the fuel tank and then carry the product to
a spot 3 m or more away from where it was refuelled before turning on the engine.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
When using the product, you should wear proper clothing and
protective equipments as follows:
◦ (1) Helmet
◦ (2) Protection goggles or face protector
◦ (3) Thick work gloves
◦ (4) Non-slip-sole work boots
◦ (5) Ear protectors
And you should carry with you
◦ description
◦ properly locked fuel tank
◦ spare blade
◦ things to notify your working area (shutter band, warning
signs).
Never use the product when wearing pants with loose cuffs,
when wearing sandals,
Item 61495, 61496
or when barefoot.
Page 6
02 2021-2

Advertisement

loading

This manual is also suitable for:

61496