Advertisement
Cutting operation
Metal blade usage
Nylon cutter usage
Nylon cord consumes large power. Please note that the engine rotation should be in opera-
•
tion.
Nylon cutter cut grass with the power of cord rotation. If you try to cut grass for the length of
•
cord at one 50 % as large as when using metal blade. time rotation speed becomes lower due
to resistance and you cannot cut well. In case of large resistance get the nylon cutter away
from grass once make the rotation speed higher and cut a small amount of grass at one time.
If you try to cut grass by swinging the brush cutter in the reverse way (from left to right) scraps
•
fly in the direction away from the body, so you can avoid getting your clothes dirty.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
a) Always cut by guiding the head from your right
to left.
b) A metal blade cut best up to the point
the edge. Use that area for cutting shrubs tough
and thick weeds. For cutting young grass you can
use up to
2
/
from the tip of blade.
3
c) Adjust the engine speed according to the cut-
ting objects. Cut the young grass at middle speed
and cut shrubs or tough and thick weeds at high
speed.
Operating at low speed make it easier for grass
weeds or twigs to caught up in the blades and
also it makes the shaft and clutch wear down
more quickly.
№ Name
For boughs and
1
trees
For
grass
2
weeds
Item 61495, 61496
1
/
№ Name
3
Cutting direction
and
4
Rotation direction
Page 14
02 2021-2
from
3
Advertisement
