Advertisement
Operation
Starting the engine
Before starting the engine inspect the entire unit for loose fittings or fuel leaks and
the cutting attachment is properly installed and securely fastened.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
a) Turn the cap to the fuel tank to make sure that it is
fixed on tightly (F8).
№ Name
1
Cap
b) Open the fuel tank cock(F9).
c) Move the choke lever to the closed position (F9).
When restarting immediately after stopping
the engine move the choke lever to the open position.
№ Name
1
Choke lever
2
Fuel cock
3
Close
d) Set the throttle lever to the starting position (F10).
When restarting immediately after stopping
the engine move the throttle lever to the idling position.
№ Name
1
Idling
2
Starting (
1
/
–
1
/
3
2
Item 61495, 61496
№ Name
2
Fuel tank
№ Name
4
Open
5
Close
6
Open
№ Name
3
Full throttle
open)
Page 12
02 2021-2
Advertisement
