Advertisement
Maintenance
Blade
Air filter
A clogged air filter may increase fuel consumption while cutting down the engine
power. If you operate the brush cutter without the air filter or with a deformed filter element will quickly
ruin the engine.
Fuel filter
Take the filter out of the fuelling port using a small wire hook. Disconnect the filter assembly from the
fuel pipe and unhook the retainer to disassemble it. Clean the components with gasoline.
A clogged fuel fitter may cause poor acceleration of the engine.
© by WilTec Wildanger Technik GmbH
http://www.WilTec.de
http://www.aoyue.eu
http://www.teichtip.de
a) After 25 hours of service, sharpen each cutting edge
and make sure the bottom corner is rounded.
b) Do not cool the blade with water in case of using
grinder. If may cause cracks on blade.
Check and clean the filter element in warm soapy water
if required. Dry completely before installing. If the ele-
ment is broken or shrunk replace with a new one.
№ Name
1
Cover
2
Filter element
Item 61495, 61496
№ Name
3
Screen
4
Body
Page 15
02 2021-2
Advertisement
