Table of Contents
Advertisement
8.1 PARTS ORDERING PROCEDURE
A. Contact your local dealer, distributor, or
authorized service center.
B. Contact Capitol Gears, Inc. If the above
cannot supply the part(s) you need write:
Customer service
Capitol Gears, Inc.
349 North Hamline Ave. Tel:
St. Paul, MN 55104
USA
Necessary Information
1. Model
2. Option Code
3. Serial No.
4. Ratio
5. Eng.Mfg.No (if any)
6. Part Number
7. Description
8. Figure Number and
item number
9. Quantity being
ordered
NOTE:
Please do not use the terms "Set" or "complete"
when ordering parts but specify exactly each part
required.
"CAPITOL" Marine Gear Model
Serial No.
Installed in (Name of Vessel)
Installed by
Address
For use with (Engine & Model)
Type of Service
Purchased from (Dealer's Name & Add.)
Date purchased
SECTION 8. PARTS INFORMATION
Cable address:
"Cap marine"
-
(612) 645
9491
Telex: 29-7081
Sample
HP-9400
1-09400-03011-10111
1-105-0680
3.074:1 A.E.R
1-00230-2800
Clutch disc, driving
Fig. 46, item 6
19
8.2 UNIT RECORD
A list of distributors for Capitol Gear
equipment may be obtained by writing to the
customer service department at the address
mentioned above.
Do not send any equipment to the factory
without authorization from the customer
service department.
Capitol Gears will route parts with
customer's best interest in mind if routing is
not specified when ordering.
Capitol Gears, Inc. Will provide its
distributors, dealers and service centers with
current changes and additions to service
literature.
Contact your local Capitol representative for
up to date service material.
CAPITOL GASKET AND SEAL KIT NO.
1-10169-0000 (HY-7700)
1-10168-0000 (HY-6900)
Includes the necessary gaskets, seals and o-
rings commonly used for repair.
Clutch quad rings must be purchased
separately.
date
44
44
Advertisement
Table of Contents
