Table of Contents
Advertisement
9. Dial oil dam pilot O.D. as shown in figure
4. record reading. Total indicator reading
must not exceed .007 inch.
10. Dial indicates oil dam bolt face as shown
in figure 5. Record reading. Total indicator
reading must not exceed .007 inch
11. Dial indicate stub shaft on chamfer as
shown in figure 6. Record reading. Total
indicator reading must not exceed .007 inch.
The sum of readings in steps 4, 5 and 6
must not exceed .007 inch.
12. Using and adequate hoist, install clutch
on splines of drive flange shaft being careful
that clutch disc teeth enter driving drum
properly. Be sure that the forward end flange
marked "toward engine" is placed toward the
engine flywheel. The forward pack contains
the greater number of clutch discs and must
go toward the engine flywheel. Otherwise
reverse damage to clutch may result.
12
Advertisement
Table of Contents
