SETTINGS
The sub-menu »4 :
$
A/B
$
3
–A
09 . 750
~
A
09 . 750
–B
09 . 750
~
B
09 . 750
$
%
/
OK
_______________________________________________________________________________
« ( LNC set-up«)
$
1
Press the » « button followed by the
»3
« will be flashing (the number of the selected LNC arrangement).
Key to symbols:
$ A/B
$
3
–
A 09.750 GHZ
~
A 09.750 GHz
–
B 09.750 GHz
~
B 09.750 GHz
$
%
OK
LNC arrangements (
In order to tune the receiver as finely as possible to the various aerial installations, 6 LNC arrange-
ments are available for the SAT input.
Depending on the LNC arrangement selected, varying switching signals are emitted when changing
to other channel positions (22 kHz, Mini-DiSEqC, DiSEqC 1.0) in order to select the LNC required
for reception and its frequency range.
The oscillator frequency of the LNC used must be entered.
The number of possible oscillator frequencies will depend on the LNC arrangement chosen.
The different variations in the LNC arrangements are shown on pages 39 to 41.
»4
« button to display the »
A
B
Reception unit
or
(INPUT
LNC arrangement (LNC type, see pages 39 - 41).
Satellite A, LO frequency of the LNC without 22 kHz switching signal
Satellite A, LO frequency of the LNC with 22 kHz switching signal
Satellite B, LO frequency of the LNC without 22 kHz switching signal
Satellite B, LO frequency of the LNC with 22 kHz switching signal
LNC voltage supply on (
) off (
Exit menu
Save and exit menu
)
$
4:
$ $
« sub-menu (LNC set-up).
A
B
or
) of the satellite receiver.
–
)
37