Grundig STR 7122 TWIN Manual page 16

CH.
ADJ. TV /VCR
MAINS INPUT A
INPUT 13V/18V
L TV
350mA DC
AERIAL
AUDIO
OUT
R
230V
50/60 Hz DO NOT REMOVE COVERS
30W MAX. HAZARD-LIVE PARTS
CH.
ADJ.
TV /VCR
MAINS INPUT A
INPUT 13V/18V
L
350mA DC
AERIAL
AUDIO
OUT
R
230V
50/60 Hz
30W MAX.
CH.
ADJ. TV /VCR
MAINS INPUT A
13V/18V
INPUT
L
350mA DC
AERIAL
AUDIO
OUT
R
230V
50/60 Hz
30W MAX.
16
CONNECTING UP
Connecting up to hifi equipment
The best sound quality is obtained by connecting the receiver to hifi equipment.
1
Connect the »AUDIO
DE
via a commercially available phono (cinch) cable to the corresponding input sockets on your
hifi unit.
Connecting devices via an RF aerial cable
If your TV set or video recoder is not fitted with a EURO-AV socket, these devices receive the
signals via the modulator output socket »TV/VCR« on the back of the receiver.
TV
1
Connect the » TV/
DO NOT REMOVE CO
HAZARD-LIVE PARTS
video recorder using a commercially available RF aerial cable.
2
If you wish to receive also terrestrial TV programmes via the receiver, it is necessary to connect
the aerial cable of the terrestrial aerial with the aerial input socket »AERIAL« on the back of the
TV
receiver.
DO NOT REMOVE CO
HAZARD-LIVE PARTS
3 When the connections are made, the devices must be adjusted to each other.
See pages 46 and 47, under "Tuning the TV set and video recorder to the receiver" for
information on how this works and what to look out for.
____________________________________________________________________
OUT« sockets »L« (left) and »R« (right) on the back of your receiver
VCR « socket of the receiver with the aerial input socket of the TV set and/or