Table of Contents
Advertisement
2
?
?
003
G
WED
WEEK 2
G
20:15
GI 22:03
–
19:28
SUN
/
OK
26
TIMER PROGRAMMING
Enter stop time (
Note:
Make sure the stop time is not earlier than the start time.
If a stop time is entered which lies before the start time, the Timer remains activated until the stop
time is reached next day
Select the »
4
You may switch between hours (0 ... 23) and minutes (0 ... 59) using the
5
,
Press the
»,
Enter the stop time using the
6
Activating the
7
Switch on the timer function
8
Save the setting with the » OK« button.
The main menu is displayed on the screen again.
9
Exit the menu by pressing the » « button.
10
The receiver must be switched to standby using the » « button before the start time is reached.
On the front panel of the receiver the green »
This shows that the timer of the receiver is programmed.
Pre-programming the video recorder
Do not forget to pre-programme your video recorder accordingly for the timer recording.
____________________________________________________________
GI
)
GI
22:03« row using the
« button to switch back from minutes (0 ... 59) to hours (0 ... 23).
»1 ... 0
« buttons, or select it using the »
timer
function ( )
(
) using the »
.
».
« button.
; :
;
;
;
:
:
« or »
« button.
–
« is lit up as well as the red »
.
».
« button.
:
« buttons.
G
«.
Advertisement
Table of Contents
