Table of Contents
Advertisement
? A
?
003
11. 494 GHZ
$
H – A
7.02 MHz 7.20 MHz
~
PANDA BW 1
–
( (
{
1
– – –
/ /
+
=
/
OK
32
SETTINGS
_______________________________________________________________________________
Channel position number (
1
The channel position number and reception unit is displayed for checking. They cannot be
changed in the menu.
Transmission frequency of the selected satellite channel ( )
1
You can enter the transmission frequency of the selected satellite channel directly by using
the »
« buttons, or change the value in 1 MHz intervals using the »
1... 0
Polarization and switching signal (
1
Select horizontal »
;
; :
:
the »
« buttons.
Note:
When receiving with several satellite aerials or LNCs or with an LNC with a range switch-over,
you can select the signal source by switching the 22 kHz signal and the »
on (»~«) or off (»
For more information see the chapter "Multi-satellite reception" on the pages 42 to 45.
Sound settings (
1
Select the right or left sound channel using the
You can now either set the carrier frequency directly, using the numerical buttons »
or you can alter it step by step using the »
A/B)
?
H
« or vertical » V« polarization of the selected satellite channel using
; :
;
:
–
«) using the »
« buttons.
)
»,
; :
;
:
;
; :
)
$
A/B
, .
.
« buttons.
« buttons.
:
« buttons.
« satellite selection
«,
1... 0
Advertisement
Table of Contents
