Symbols - ResMed AirSense 11 Manual

Air tubing
ClimateLineAir 11 temperature range
ClimateLineAir 11 temperature cut out
Maximum recommended pressure
Maximum working temperature, when used with a
humidifier
Material
Inner diameter
Length
Note: The manufacturer reserves the right to change these specifications without notice.
Air tubing resistance to flow and compliance information
Refer to the Air tubing compliance guide in ResMed.com.
Characteristics of compatible Bacterial/ Viral (B/V) filters
Resistance over the flow range:
Dead space (volume):
Connectors:
Bacterial Filtration Efficiency (ie BFE):
Viral Filtration Efficiency (ie VFE):
Maximum duration of use:
Replacing B/V filter:
Compliance:
Note: B/V filters are high in impedance and show variability in their pneumatic characteristics that may affect delivered
pressure and the accuracy of displayed and reported values
Applied parts
Patient interface (mask) and air tubing

Symbols

Follow instructions before use.
Humidity limitation.
Direct current.
dripping water when tilted up to 15 degrees from specified orientation.
unsafe (do not use in the vicinity of an MRI device).
FAA Compliant. Type BF applied part.
number. Device number.
Representative.
law restricts these devices to sale by or on the order of a physician).
Maximum water level.
See symbols glossary at ResMed.com/symbols.
Indicates a warning or caution.
Operating altitude.
Class II equipment.
Serial number.
Bluetooth. Start therapy/Standby.
ClimateLineAir 11
60 to 86ºF (16 to 30ºC)
≤106ºF (≤41ºC)
30 cm H O (30 hPa)
2
-
Flexible plastic and electrical
components
0.6" (15 mm)
6'6" (2.0 m)
Recommend a B/V filter with resistance of < 2.5cm H
< 90 mL
ISO 5356-1:2015 compliant connectors
>99.9%
>99.7%
Refer to manufacturer's datasheet
Refer to manufacturer's datasheet
< 0.103mL/ cm H O (<0.103mL/hPa)
2
Atmospheric pressure limitation.
Protected against finger sized objects and against
RTCA/DO-160 Section 21, Category M Compliant &
Date of Manufacture
Batch code.
Open tub to fill.
SlimLine/ Standard
-
-
30 cm H O (30 hPa)
2
≤106ºF (≤41ºC)
Flexible plastic
SlimLine: 0.6" (15 mm)
Standard: 0.74" (19 mm)
SlimLine: 6' (1.8 m)
Standard: 6'6" (2.0 m)
O at 60 L/min
2
Temperature limitation.
Manufacturer.
Non-ionising radiation.
Medical device.
European Authorized
Prescription only (In the US, Federal
Use distilled water only.
MR
Catalog
English 41