Symbols; Environmental Information - ResMed Stellar Series User Manual

Air filter
Air tubing
IEC 60601-1 classifications
Air travel requirements
This device is not suitable for use in the presence of a flammable anesthetic mixture.
Notes:
•
The manufacturer reserves the right to change these specifications without notice.
•
Pressure may be displayed in cm H

Symbols

Follow instructions for use;
Alarm); IP31 Device is protected against solid foreign objects of 2.5 mm diameter and greater and
vertically falling water drops;
connection on the device);
oxygen supply;
with EC directive 93/42/EEC, class II b;
with care; Maximum humidity;
Batch code;
Use by date;
China environmental hazardous substances.

Environmental information

This device must be disposed of in accordance with the laws and regulations of the country in which
disposal occurs.
The crossed-out wheeled bin symbol
disposed of together with general household waste, but instead requires separate disposal. This
requirement for separate disposal is based on the European Directive 2012/19/EU for electrical and
electronic equipment, and the European Directive 2006/66/EC for batteries. You can hand in the product at
a municipal collection point, for example. This reduces the impact on natural resources and prevents
contamination of the environment through the release of hazardous substances.
26
Electrostatic fibre mesh with TPE frame structure. Bacterial filtration efficiency of >99.9%
for ~2.7 micron particle size.
Standard air tubing: Flexible plastics, 2 m or 3 m length (22 mm diameter)
SlimLine air tubing: Flexible plastics, 1.83 m length (15 mm diameter)
For more information on air tubing resistance to flow, compliance, tubing length, and inner
diameter, refer to the Air tubing compliance guide in ResMed.com.
•
Class II (Clause 3.14–double insulation). This adherence means the need for an
protective earthing (ie, an earthed plug) is not necessary.
•
Type BF
•
Continuous operation
Medical-Portable Electronic Devices (M-PED) that meet the Federal Aviation Administration
(FAA) requirements of RTCA/DO-160 can be used during all phases of air travel without
further testing or approval by the airline operator. ResMed confirms that the Stellar meets
RTCA/DO-160 requirements.
O or hPa.
2
Class II equipment;
Caution;
Standby or preparatory state for a part of equipment;
(max 30 L/min);
Temperature limitation for storage and transport;
Keep dry;
Do not re-use; Do not use if package is damaged;
Keep away from sunlight;
indicates that the product bearing this symbol may not be
Type BF applied part;
General warning sign (see H4i connector plug and AC
Data port;
Manufacturer;
Latex-free;
MR unsafe (do not use in the vicinity of an MRI device).
Bell (Remote
Connection for
CE labeling in accordance
Upside; Serial number;
Catalogue number;
Device weight; Contains no
Handle