Clearaudio TT5 User Manual page 7

User manual / Bedienungsanleitung
• To mount the clamping ring on a turntable of the Clearaudio Innovation series you will need
to mount the Unify 12 inch level base (Art. No. AC030-4).
For mounting the clamping ring or the Clearaudio swing base.
Pic. 4: Unify 12 inch level base (Art. No. AC030-4)
2.2 Mounting the clamping ring
If the clamping ring is not necessary you can proceed with point 3.
Attach the aluminium clamping ring to the clean surface of the turntable chassis using the included
M4 x 10 hex socket head cap screws and the matching hex wrench (#3).
Make sure that the clamping ring sits perfectly flat on the mounting surface.
Pic. 5: Mounting the clamping ring
Please tighten all three screws firmly (Pic. 6).
Made in Germany
Pic. 6: Fixing the clamping ring
Page / Seite 7