Mounting The Clamping Ring - Clearaudio TT5 User Manual

Hide thumbs Also See for TT5:

Table of Contents

Available languages

User manual / Bedienungsanleitung

2. Mounting the clamping ring

2.1 Selecting the correct tonearm base

If you would like to use the

swing base as described in the user manual. The clamping ring is not needed in this case.

Whether you want to use the

4 onwards) for setting the

Before mounting the clamping ring, first check that the correct tonearm base is mounted on your

turntable.

For Clearaudio Performance DC and Ovation turntables you can use the following tonearm bases:

•

Uni concept / Performance DC / Ovation (Art. No. AC031-5)

This tonearm base is equally suitable for mounting all Clearaudio radial tonearms and

tangential tonearm without additional mounting of the clamping ring.

Please note: This tonearm base is not suitable to mount the swing base!

Pic. 2: Uni concept / Performance DC / Ovation (Art. No. AC031-5)

•

Unify base (Art. No. AC031-4)

For mounting the clamping ring or the Clearaudio swing base.

Pic. 3: Unify base (Art. No. AC031-4)

Page / Seite 6

TT5

in combination with an swing base, please go ahead and mount the

TT5

with or without swing base, the following instructions (from point

TT5

apply are for both options.

TT5

Table of Contents

Table of Contents