Module Status Leds - Rockwell Automation Trusted TMR Product Overview

Trusted TMR 120 Vdc Output Module – 32 Channel

4.2. Module Status LEDs

There are six module status indicators on the Module Front Panel: three Healthy, one
Active, one Standby, and one Educated. The Healthy indicators are controlled directly by
each Module slice. The Active, Standby, and Educated indicators are controlled by the FPU.
The FPU receives data from each of the Module slices. The FPU performs a 2oo3 vote on
each data bit from the slices and sets the indicators accordingly.
The Module status indicator modes and their meanings are described as follows:
INDICATOR STATE
Healthy Off
Amber
Green
Red – flashing
Red (momentary)
Red
Active Off
Green
Red – flashing
Red – flashing
Standby Off
Green
Red – flashing
Rockwell Automation Publication ICSTT-RM281P-EN-P (PD-T8471)
DESCRIPTION
No power applied to the Module.
Slice is in the start-up state (momentary after installation or
power-up).
Slice is healthy.
Fault present on the associated slice but the slice is still
operational.
On installation – power applied to the associated slice.
The associated slice is in the fatal state. A critical fault has
been detected and the slice disabled.
Module is not in the Active state.
Module is in the Active (or Maintain) state.
Module is in the shutdown state if the Standby LED is off.
Module is in the fatal state if the Standby LED is also
flashing.
Module is not in the Standby state.
Module is in the Standby state.
Module is in the fatal state. The Active LED will also be
flashing red.
Issue 16
4. Operation
27