1. Manuals
  2. Brands
  3. Winmate Manuals
  4. Motherboard
  5. IB32
  6. User manual

Winmate IB32 User Manual

3.5” sbc with intel bay trail processors, hdmi, lvds, vga, dual giga ethernet, and mini-pcie interface
Hide thumbs Also See for IB32:
Table of Contents

Advertisement

Quick Links

Download this manual
IB32 Motherboard
3.5" SBC with Intel ® Bay Trail Processors, HDMI, LVDS, VGA, Dual Giga Ethernet,
and Mini-PCIe Interface
V400
User Manual
Document Version 1.0
Document Part No. 91711110101W

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the IB32 and is the answer not in the manual?

Questions and answers

Related Manuals for Winmate IB32

Summary of Contents for Winmate IB32

  • Page 1 IB32 Motherboard 3.5” SBC with Intel ® Bay Trail Processors, HDMI, LVDS, VGA, Dual Giga Ethernet, and Mini-PCIe Interface V400 User Manual Document Version 1.0 Document Part No. 91711110101W...

  • Page 3: Table Of Contents

    IB32 SBC User Manual Table of Contents Preface ............................3 Chapter 1: General Information ....................7 1.1 Introduction ..........................8 1.2 Features ............................. 8 1.3 Motherboard Specifications ......................9 1.3.1 Hardware and Software Description ................9 1.3.2 Function block ........................ 11 1.3.3 Board dimensions ......................
  • Page 4 IB32 SBC User Manual Chapter 4: Driver Installation ...................... 65 4.1 Intel Chipset Driver ........................66 4.2 Graphics Driver ........................70 4.3 Audio Driver ..........................75 4.4 Intel Sideband Fabric Device (Intel MBI) Driver (Windows 10) ..........78 4.5 Intel® Trusted Execution Engine Driver Installation ..............81 4.6 USB 3.0 Driver (Windows 7) ....................

  • Page 5: Preface

    IB32 SBC User Manual Preface IMPORTANT: This product can be used only in industrial-grade computers. Copyright Notice No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer.

  • Page 6: Packing List

    Preface Packing List Before using this Motherboard, please make sure that all the items listed below are present in your package: IB32 Motherboard  User Manual & Driver CD\  Optional Accessories: AC to DC 12V Power Adapter  Power Cord ...

  • Page 7: Advisory Conventions

    IB32 SBC User Manual Advisory Conventions Three types of advisories are used throughout the user manual to provide helpful information or to alert you to the potential for hardware damage or personal injury. These are Notes, Important, Cautions, and Warnings. The following is an example of each type of advisory.

  • Page 8: Safety And Warranty

    Preface Safety and Warranty Please read these safety instructions carefully. Please keep this user- manual for later reference. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible.

  • Page 9: Chapter 1: General Information

    IB32 SBC User Manual Chapter 1: General Information This chapter includes the IB32 Motherboard background information. Sections include: Introduction Features Motherboard Specifications...

  • Page 10: Introduction

    Chapter 1: General Information 1.1 Introduction Thank you for choosing the IB32 motherboard. This motherboard is integrated with Intel® Celeron® Bay Trail-M N2930 1.83GHz which offers a high-performance computing platform with low power consumption. The new motherboard supports 204-pin SO-DIMM DDR3L at speeds of 1333 MHz, up to 8GB.

  • Page 11: Motherboard Specifications

    IB32 SBC User Manual 1.3 Motherboard Specifications 1.3.1 Hardware and Software Description Model Name IB32 SBC Hardware Support: Intel® Celeron® Bay Trail-M N2930 1.83GHz Processor System (2M Cache, up to 2.16GHz) Specifications System Memory DDR3L 1333 MHz SO-DIMM Slot, Max. 8GB...
  • Page 12 Chapter 1: General Information Model Name IB32 SBC Power Management Power Requirement 12V DC-IN Power Jack Software Support: Drivers Intel Chipset Driver Graphics Driver Audio Driver Intel Sideband Fabric Device (Intel MBI) Driver (Windows 10) Intel Trusted Engine Interface (Intel TXE) Driver USB 3.0 Driver (Windows 7)

  • Page 13: Function Block

    IB32 SBC User Manual 1.3.2 Function block...

  • Page 14: Board Dimensions

    Chapter 1: General Information 1.3.3 Board dimensions...
  • Page 15 IB32 SBC User Manual AC to DC Power Adapter Components (optional) AC to DC 12V Power Adapter Power Cord The Motherboard allows plugging in 12V DC-IN jack on the board without another power module converter under Intel ® Bay Trail-M Celeron N2930 processor power consumption.

  • Page 16: Chapter 2: Hardware Installation

    Chapter 2: Hardware Installation Chapter 2: Hardware Installation This chapter provides information on how to use jumpers and connectors on the IB32 Motherboard. Be cautious while working with these modules. Please carefully read the content of this chapter in order to avoid any damages. The sections include:...

  • Page 17: Memory Module (So-Dimm) Installation

    IB32 SBC User Manual 2.1 Memory Module (SO-DIMM) Installation The IB32 Motherboard has two 204-pin SODIMM slot. The socket supports up to 8GB DDR3L 1333 SO-DIMM RAM. When installing the –memory unit, please follow the steps below: Steps 1 Firmly insert the SO-DIMM at an angle of about 30-degree into the slot. Align the SO-DIMM with the slot until it is fully inserted.

  • Page 18: I/O Equipment Installation

    Chapter 2: Hardware Installation 2.2 I/O Equipment Installation 2.2.1 12V DC-IN The Motherboard allows plugging in 12V DC-IN jack on the board without another power module converter under power consumption by Intel® Celeron® Bay Trail-M N2930 1.83GHz 2.2.2 Serial COM ports Three RS-232 connectors build-in the rear I/O.

  • Page 19: Jumpers And Connectors

    IB32 SBC User Manual 2.3 Jumpers and Connectors This section describes the location of each of the board’s jumpers and connectors. 2.3.1 Component Side...

  • Page 20: Solder Side

    Chapter 2: Hardware Installation 2.3.2 Solder Side 2.3.3 I/O Side...

  • Page 21: Jumper Settings

    IB32 SBC User Manual 2.4 Jumper Settings This section explains how to set jumpers for correct configuration of the motherboard. NOTE: A pair of needle nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes.

  • Page 22: Setting Jumpers

    Chapter 2: Hardware Installation 2.4.2 Setting Jumpers 2.4.2.1 JP1: Backlight Power Selector Setting Function 1-2* 12 V *Default 2.4.2.2 JP2: Backlight Enable Selector Setting Function 1-2* Control by platform Always on *Default 2.4.2.3 JP3: Backlight Control VR Pin № Name Pin №...
  • Page 23 IB32 SBC User Manual 2.4.2.5 JP5: Backlight Control Power Selector Setting Function + 3.3V 2-3* + 5.0V *Default 2.4.2.6 JP6: Brightness Control Selector Setting Function Adjust by VR Knob 2-3* PWM Mode *Default 2.4.2.7 JP7: Brightness Control to VRD Selector...
  • Page 24 Chapter 2: Hardware Installation 2.4.2.8 JP8/JP9: Serial Port (RS232/422/485) Select Refer to J8/J9 settings below. RS232 RS422 RS485 10-11 11-12 11-12 For example: At the picture below, you can see RS-232, RS-422, RS-485 (J8/J9) jumper setting. To Select RS-232 set Jumper 8 Pin 1-2 to the SHORT position, and Jumper 9 Pin1-2, 4-5, 7-8, 10- 11 to the SHORT position.

  • Page 25: Connectors And Pin Assignment

    IB32 SBC User Manual 2.5 Connectors and Pin Assignment 2.5.1 Front Side Setting Description Label Function Note AUDIO1 AUDIO 2x6 Wafer, pitch 2.0mm RTC Battery 2P Wafer, pitch 1.25mm R-Speaker out 1x2 Wafer, pitch 2.0mm L-Speaker out 1x2 Wafer, pitch 2.0mm...
  • Page 26 Chapter 2: Hardware Installation 2.5.1.1 AUDIO1: AUDIO Pin № Name Pin № Name LINE_OUT_R LINE_OUT_L LINE_IN_R LINE_IN_L MIC_R MIC_L LINE_OUT_JACK DET MIC_JACK DET LINE_IN_JACK DET 2.5.1.2 BT1: COMS Battery Pin № Name Pin № Name 2.5.1.3 CN1: R-Speaker Out Pin № Name Pin №...
  • Page 27 IB32 SBC User Manual 2.5.1.4 CN2: L-Speaker Out Pin № Name Pin № Name LOUT- LOUT+ 2.5.1.5 CON1: Panel Power Select Setting Function 1-2* Panel Power +3.3V Panel Power +5V Panel Power +12V *Default 2.5.1.6 CON2: Backlight Pin № Name Pin №...
  • Page 28 Chapter 2: Hardware Installation 2.5.1.7 CON3: Serial ports (RS232/422/485) Pin № Name Pin № Name 2.5.1.8 CPU_FAN1: CPU FAN Pin № Name Pin № Name +12V SENSE 2.5.1.9 DCJACK2: DC-In 2.5 Pin № Name Pin № Name DC_IN *Not visible for user...
  • Page 29 IB32 SBC User Manual 2.5.1.10 Debug 1: Debug Port Pin № Name Pin № Name LPC_AD0 +3.3V LPC_AD1 LPC_AD2 LPC_FRAME LPC_AD3 RESET CLOCK 2.5.1.11 DIMM1: DDR3 SODIMM...
  • Page 30 Chapter 2: Hardware Installation 2.5.1.12 DIDO1: GPIO Pin № Name Pin № Name DOUT3 DOUT1 DOUT2 DOUT0 DINT3 DINT1 DINT2 DINT0 DIN4 DOUT4 DIN5 DOUT5 2.5.1.13 J1: VRD Debug Pin № Name Pin № Name +3.3V DATA CLOCK RESET 2.5.1.14 LAN_LED1: External LAN LED Pin №...
  • Page 31 IB32 SBC User Manual 2.5.1.15 LVDS1: LVDS Pin № Signal Name Pin № Signal Name LCDVDD LVDS0_TX0_N LCDVDD LVDS0_TX0_P LCDVDD LVDS0_TX1_N LVDS0_TX1_P LVDS0_TX2_N LVDS0_TX2_P LVDS0_CLK_N LVDS0_CLK_P LVDS0_TX3_N LVDS0_TX3_P LVDS1_TX0_N LVDS1_TX0_P LVDS1_TX1_N LVDS1_TX1_P LVDS1_TX2_N LVDS1_TX2_P LVDS1_CLK_N LVDS1_CLK_P LVDS1_TX3_N LVDS1_TX3_P Note: Please refer to...
  • Page 32 Chapter 2: Hardware Installation 2.5.1.16 MINI PCIE1: 3G/Wi-Fi Pin № Pin № Name Name PCIE_WAKE# +3.3V BT_EN +1.5V CLK_OE# USIM_PWR USIM_DATA PCIE_CLKM USIM_CLOCK PCIE_CLKP USIM_RESET USIM_VPP Wireless_ENABLE PCIE_RESET PCIE_RXM +3.3V PCIE_RXP +1.5V SMB_CLK PCIE_TXM SMB_DATA PCIE_TXP USB_D- USB_D+ +3.3V +3.3V +1.5V +3.3V +3.3V...
  • Page 33 IB32 SBC User Manual 2.5.1.17 Panel1: OSD Membrane Control Pin № Name Pin № Name +3.3V HDD_LED PWRBTN# GND/ Backlight Reset ADJ+ NC/Backlight ADJ- NOTE: Backlight ADJ+ / Backlight ADJ- optional functions 2.5.1.18 SATA1: SATA Pin № Name Pin №...
  • Page 34 Chapter 2: Hardware Installation 2.5.1.21 SSD1: mSATA Pin № Name Pin № Name +3.3V +1.5V SATA_RXP +3.3V SATA_RXN +1.5V SMB_Clock SATA_TXN SMB_Data SATA_TXP +3.3V +3.3V +1.5V SSD_LED# +3.3V...
  • Page 35 IB32 SBC User Manual 2.5.1.22 USB2, USB3: Internal USB2.0 Pin № Name Pin № Name USB_D- USB_D- USB_D+ USB_D+ 2.5.1.23 VGA1: VGA Signal Pin № Name Pin № Name DDC_DATA DDC_CLOCK Horizontal Sync GREEN Vertical Sync BLUE 2.5.1.24 3V1: 3.3V output Pin №...

  • Page 36: I/O Side Setting Description

    Chapter 2: Hardware Installation 2.5.1.26 12V1: 12V output Pin № Name Pin № Name +12V 2.5.2 I/O Side Setting Description The table below shows each of I/O side connectors and its functions. Label Function Note COM1 Serial port (RS232/422/485) D-sub9 Male DCJACK1 DC JACK 2.5∅...
  • Page 37 IB32 SBC User Manual 2.5.2.2 DCJACK1: DC Jack1 (optional) Pin № Name Pin № Name DC_IN 2.5.2.3 HDMI: HDMI Type A Pin № Name Pin № Name TMDS_DATA2+ TMDS_DATA2- TMDS_DATA1+ TMDS_DATA1- TMDS_DATA0+ TMDS_DATA0- TMDS_CLOCK+ TMDS_CLOCK- DDC_CLOCK DDC_DATA Hot Plug Detect 2.5.2.4 LAN1, LAN2: Gigabit Ethernet...
  • Page 38 Chapter 2: Hardware Installation 2.5.2.5 USB: USB 2.0 / USB 3.0 Pin № Name Pin № Name USB_D- USB_D+ STDA_SSRX- STDA_SSRX+ GND_DRAIN STDA_SSTX- STDA_SSTX+ USB_D- USB_D+...

  • Page 39: Chapter 3: Ami Bios Setup

    IB32 SBC User Manual Chapter 3: AMI BIOS Setup This chapter contains BIOS Configuration and OS Recovery information. Sections include: When and How to Use BIOS Setup BIOS Functions Using Recovery Wizard to Restore Computer...

  • Page 40: When And How To Use Bios Setup

    Chapter 3: AMI BIOS Setup 3.1 When and How to Use BIOS Setup To enter the BIOS setup, you need to connect an external USB keyboard, press Del key when the prompt appears on the screen during start up. The prompt screen shows only few seconds so need press Del key quickly.

  • Page 41: Bios Functions

    IB32 SBC User Manual NOTE: You can press the F1, F2, F3, F4, –/+, and Esc keys by connecting a USB keyboard to your computer. 3.2 BIOS Functions 3.2.1 Main Menu When you enter BIOS setup, the first menu that appears on the screen is the main menu. The Main menu displays the basic information about yoursystem including BIOS version, processor RC version, system language, time, and date.

  • Page 42: Advanced Menu

    Chapter 3: AMI BIOS Setup 3.2.2 Advanced Menu The advanced menu also uses to set configuration of the CPU and other system devices. There are sub menus on the left frame of the screen. IMPORTANT: Handle advanced BIOS settings page with caution. Any changes can affect the operation of your computer.
  • Page 43 IB32 SBC User Manual BIOS Setting Description Setting Option Effect CPU Configuration Configures CPU settings Enter Opens submenu PPM Configuration Configures PPM settings Enter Opens submenu Thermal Configures Thermal Enter Opens Configuration Parameters submenu IDE Configuration Configures IDE Enter Opens...
  • Page 44 Chapter 3: AMI BIOS Setup 3.2.2.1 ACPI Settings BIOS Setting Description Setting Option Effect Enable ACPI Auto BIOS ACPI Enable/ Disable Enables or Configuration Auto Disables this Configuration function Enable Hibernation Control Enable/ Disable Enables or hibernation Disables this function 3.2.2.2 F81866 Super IO Configuration You can use the screen to select options for Super IO Configuration, and change the value of the option selected.
  • Page 45 IB32 SBC User Manual Serial Port 1~5 Use these items to set parameters related to serial port 1~5. Watch Dog Time Select You can either disable Watch Dog Time Select, or set up the time.Use <Arrow> keys to navigate and please press <Enter> to select the item.
  • Page 46 Chapter 3: AMI BIOS Setup GPI0 Port Configuration You can use the screen to change GPI0 Port setting. Use these items to set parameters related to PIN3-PIN14 Control. 3.2.2.3 Hardware Monitor You can check PC Health Status parameters such as system temperature, fan speed etc.
  • Page 47 IB32 SBC User Manual 3.2.2.4 S5 RTC Wake Settings Wake System from S5 with fixed time setting Wake system from S5 enables or disables system wake on alarm event. It allows you to wake up the system in a certain time.
  • Page 48 Chapter 3: AMI BIOS Setup Wake system from S5 after dynamic time setting Select Dynamic Time to set the system to wake on the current time + increase minute (s).
  • Page 49 IB32 SBC User Manual 3.2.2.5 CPU Configuration Press <Enter> to view current CPU configuration and make settings for the following sub-items. BIOS Setting Description Setting Option Effect Socket CPU This item contains socket Enter Open sub-menu Information specific CPU information.
  • Page 50 Chapter 3: AMI BIOS Setup 3.2.2.6 PPM Configuration BIOS Setting Description Setting Option Effect CPU C State Shows CPU C State Enabled/ Enable or Disable CPU C Report Report Disabled state report to OS Max CPU C- Allows to enter power- C1E, C3, C6, Enable or Disable CPU C State...
  • Page 51 IB32 SBC User Manual 3.2.2.7 Thermal Configuration BIOS Setting Description Setting Option Effect Critical Trip Specifies the temperature 90C, 87C, 85C, Select the disable Point at which the OS will shut 79C, 71C, temperature for the down the system 63C,55C,47C,...
  • Page 52 Chapter 3: AMI BIOS Setup 3.2.2.8 IDE Configuration BIOS Setting Description Setting Option Effect Serial- ATA (SATA) Responsible for Enabled/ Enable or disable this function supporting chipset Disabled drives with SATA interface. SATA Speed Allows forcing the Gen1 The maximum speed will be Support speed limit SATA II limited to 150 MB/s...
  • Page 53 IB32 SBC User Manual BIOS Setting Description Setting Option Effect [RAID] Allows combining hard drives in RAID-arrays in order to improve the reliability of data storage, or to increase the speed. Serial- ATA Port 0 The option turns on Enabled/...
  • Page 54 Chapter 3: AMI BIOS Setup 3.2.2.9 Miscellaneous Configuration OS Selection This item allows users to select the proper Operating System. BIOS Setting Description Setting Option Effect Windows 8.X Allows user to choose the Enter Use Windows 8.X proper OS. Windows 7 Allows user to choose the Enter Use Windows 7...
  • Page 55 IB32 SBC User Manual 3.2.2.10 CSM Configuration BIOS Setting Description Setting Option Effect CSM Support The Compatibility Support Module Enabled/ Enable or (CSM) is a component of the UEFI Disabled disable the firmware that provides legacy BIOS Compatibility compatibility by emulating a BIOS...
  • Page 56 Chapter 3: AMI BIOS Setup BIOS Setting Description Setting Option Effect Legacy Only Legacy option ROMs are booted Video Specifies which Video option ROM is UEFI Only UEFI booted option ROMs are booted Legacy Only Legacy option ROMs are booted Other PCI Specifies which option ROM is booted UEFI...
  • Page 57 IB32 SBC User Manual 3.2.2.11 USB Configuration BIOS Setting Description Setting Option Effect Legacy USB User can enable or disable Disable Will keep USB Support USB port. devices available only for EFI applications. Enable Enable all the USB devices USB 3.0...
  • Page 58 Chapter 3: AMI BIOS Setup BIOS Setting Description Setting Option Effect support support. USB Transfer The time-out value for 1 Sec Depends on the time- time- out control, bulk, and interrupt 5 Sec out value transfers. 10 Sec 20 Sec Device Reset USB mass storage device 10 Sec...

  • Page 59: Chipset Menu

    IB32 SBC User Manual 3.2.3 Chipset Menu For items marked with ►, please press <Enter> for more options. BIOS Setting Description Setting Option Effect High Precious Allow to set up High Precious Timer Enabled/ Enables/Disab Timer settings Disabled les this...

  • Page 60: Security Menu

    Chapter 3: AMI BIOS Setup 3.2.4 Security Menu In the Security menu, users can set administrator password, user password, and HDD security configuration. BIOS Setting Description Setting Option Effect Administrator Displays whether or not an Enter Enter Password administrator password has been password set.

  • Page 61: Boot Configuration

    IB32 SBC User Manual 3.2.5 Boot Configuration The Boot menu sets the sequence of the devices to be searched for the operating system. The bootable devices will be automatically detected during POST and shown here, allowing you to set the sequence that the BIOS use to look for a boot device from which to load the operating system.
  • Page 62 Chapter 3: AMI BIOS Setup BIOS Setting Description Setting Option Effect Boot Mode Specifies which mode will be used Legacy Only Legacy option Select for booting is booted UEFI Only UEFI option is booted Boot Option Specifies the overall boot order Ex: Boot Hard drive as the first #1~#6...

  • Page 63: Save & Exit

    IB32 SBC User Manual 3.2.6 Save & Exit The Exit menu displays a way how to exit BIOS Setup utility. After finishing your settings, you must save and exit for changes to be applied. BIOS Setting Description Setting Option Effect...
  • Page 64 Chapter 3: AMI BIOS Setup BIOS Setting Description Setting Option Effect Discard Discard changes done so far to any <YES> Saves the Changes of the setup options. changes <NO> Return to the BIOS Setup Main Menu Restore Restore/load default values for all <YES>...

  • Page 65: Using Recovery Wizard To Restore Computer

    Celeron N2930 series computer has a dedicate recovery partition stored on the hard drive of the PC to enable quick one-key recovery process. This partition occupies about 11GB of the storage space, and comes built-in to each IB32 series PC. IMPORTANT: Before starting the recovery process, be sure to backup all user data, as all data will be lost after the recovery process.
  • Page 66 Chapter 3: AMI BIOS Setup...

  • Page 67: Chapter 4: Driver Installation

    IB32 SBC User Manual Chapter 4: Driver Installation This chapter offers information on all of the recommend driver installations. Sections include: Intel Chipset Driver Graphic Driver Audio Driver Intel Sideband Fabric Device (Intel MBI) (for Windows 10) Intel TXE Driver...

  • Page 68: Intel Chipset Driver

    Chapter 4: Driver Installation 4.1 Intel Chipset Driver 1. Insert the CD that comes with the motherboard. Open the file document Chipset Driver and click on infinst_auto.exe to install the driver. 2. Click Next to continue the installation.
  • Page 69 IB32 SBC User Manual 3. Click Yes to agree with the license terms. 4. Click Next to continue.
  • Page 70 Chapter 4: Driver Installation 5. Please wait for the following operations to be performed. 6. Click Next to continue.
  • Page 71 IB32 SBC User Manual 7. Select Yes, I want to restart this computer now, and click Next to finish the installation.

  • Page 72: Graphics Driver

    Chapter 4: Driver Installation 4.2 Graphics Driver 1. Insert the CD that comes with the motherboard. Open the file document “Graphics Driver” and click “Setup.exe” to install the driver. 2. Click Next to continue the installation. 3. Click Yes to agree with the license terms.
  • Page 73 IB32 SBC User Manual 4. Click Next to continue the installation.
  • Page 74 Chapter 4: Driver Installation 5. Click Next to continue the installation. 6. Click Next to continue the installation.
  • Page 75 IB32 SBC User Manual Windows Security warning message will appear on the screen, click “Install this driver software anyway” to continue the installation. 7. Please wait for the following operations to be performed.
  • Page 76 Chapter 4: Driver Installation 8. Click Next to continue the installation. 9. Click Yes, I want to restart this computer now to finish the installation and restart the computer.

  • Page 77: Audio Driver

    IB32 SBC User Manual 4.3 Audio Driver 1. Insert the CD that comes with the motherboard. Open the file document Audio Driver and click on Setup.exe to install the driver. 2. Wait while setup is preparing the installation.
  • Page 78 Chapter 4: Driver Installation 3. Click Next to continue the installation. 4. Please wait for the driver to configure your new software installation.
  • Page 79 IB32 SBC User Manual 5. Windows security warning message will pop-up, mark Always trust software from “Realtek Semiconductor Corp” and click Install. 6. Select Yes, I want to restart my computer now, and then press finish to complete the installation.

  • Page 80: Intel Sideband Fabric Device (Intel Mbi) Driver (Windows 10)

    Chapter 4: Driver Installation 4.4 Intel Sideband Fabric Device (Intel MBI) Driver (Windows 10) 1. Insert the CD that comes with the motherboard. Open the file document MBI and click on Setup.exe to install the driver. 2. Click Next to continue the driver installation.
  • Page 81 IB32 SBC User Manual 3. Click Yes to agree with the license terms. 4. Please wait while the following setup operations are performed.
  • Page 82 Chapter 4: Driver Installation 5. It may take some time for the following setup operations to be performed. 6. Select Yes, I want to restart this computer now, and then click Finish to complete the installation.

  • Page 83: Intel® Trusted Execution Engine Driver Installation

    IB32 SBC User Manual 4.5 Intel® Trusted Execution Engine Driver Installation Follow the steps below to install the Intel Trusted Execution Engine driver: 1. Double click the SetupTXE.exe from this directory. 2. Click Next.
  • Page 84 Chapter 4: Driver Installation 3. Choose Yes, I want to restart this computer now., then click Finish to restart.

  • Page 85: Usb 3.0 Driver (Windows 7)

    IB32 SBC User Manual 4.6 USB 3.0 Driver (Windows 7) NOTE: If the operating system of the device is Windows 10 operating system, users can skip this installation. 1. Locate the hard drive directory where the driver files are stored with the browser or the explore feature of Windows*.
  • Page 86 Chapter 4: Driver Installation 4. Read the License Agreement and click Yes to proceed. 5. Review Readme File Information and click Next to proceed.
  • Page 87 IB32 SBC User Manual When the Setup Progress is complete click Next to proceed.
  • Page 88 Chapter 4: Driver Installation 7. Click Yes, I want to restart this computer now to finish and then restart your computer.

  • Page 89: Chapter 5: Technical Support

    IB32 SBC User Manual Chapter 5: Technical Support This chapter contains directory to technical support and Software Development Kit (SDK). Drivers Software Development Kit (SDK)

  • Page 90: Drivers

    If any problem occurs fill in problem report form enclosed and immediately contact us. 5.1 Drivers The list of drivers available for IB32 Motherboard: Item Driver Description Windows...

  • Page 91: Chapter 6: Watchdog Utility Reference

    IB32 SBC User Manual Chapter 6: Watchdog Utility Reference This section explains where to download and how to install Watchdog and Digital IO Utility. How to Enable Watchdog Watchdog Driver Installation Digital IO Driver Installation Where to Download...
  • Page 92 Chapter 6: Watchdog Utility Reference This section explains where to download and how to enable Watchdog Utility on Winmate computer. If OS has been reinstalled, it is also required to download and install Watchdog Driver. Quick Steps to enable Watchdog Utility on your computer: ...

  • Page 93: How To Enable Watchdog In Windows Os

    IB32 SBC User Manual 6.1 How to Enable Watchdog in Windows OS To enable Watchdog, first you need to download and install Winmate Watchdog Utility and then restart the system. triangle button to show hidden 1. On the right bottom side of the desktop screen, click icons.

  • Page 94: Watchdog Driver Installation

    Chapter 6: Watchdog Utility Reference 6.2 Watchdog Driver Installation After the operating system on your computer has been reinstalled, you need to install Watchdog driver first to enable Watchdog function. 6.2.1 Installation Files Please select the driver for the corresponding operating system. Win7_32bit Windows 7/8 x86 Edition Win7_64bit...

  • Page 95: Driver Installation Procedure

    IB32 SBC User Manual 6.2.2 Driver Installation Procedure 6.2.2.1 Uninstall the old version Before you start installing the new signature WMWDG driver, please uninstall the old WMWDG driver in Windows’s Device Manager. Select “WMWDG” under System devices and right-click it. Use Uninstall selection to remove the...
  • Page 96 Chapter 6: Watchdog Utility Reference 6.2.2.2 Install the driver Type “cmd” in the run box. The cmd.exe will appear in Programs iii. Right click on the cmd.exe and click on “Run as administrator” to start command prompt. Change directory to driver’s location, and type install to install the driver.
  • Page 97 IB32 SBC User Manual When Windows Security dialog appears, select install to continue the installation. When the driver is successfully installed, you can see “Drivers Updated successfully” message in the dos prompt. And “WMWDG” device also added in the Device Manger under “System devices”.
  • Page 98 Chapter 6: Watchdog Utility Reference...

  • Page 99: Digital Io Driver Installation

    IB32 SBC User Manual 6.3 Digital IO Driver Installation For more details about Winmate Watchdog, please download Digital IO Guide from Winmate Downloads Center: Follow instructions below to install Digital IO river. 1. Type “cmd” in the run box then the cmd.exe will appear in programs.
  • Page 100 Chapter 6: Watchdog Utility Reference 6. Open the Driver CD (included in the package) and select Digital IO AP.

  • Page 101: Where To Download Watchdog And Dido Utility

    6.4 Where to Download Watchdog and DIDO Utility To find the Drivers and SDK, please refer to the Driver CD that comes in the package or contact us. Also, you can download drivers from Winmate Download Center. Winmate Download Center Go to http://www.winmate.com/...
  • Page 102 Winmate Inc. 9F, No.111-6, Shing-De Rd., San-Chung District, New Taipei City 24158, Taiwan, R.O.C www.winmate.com Copyright © 2021 Winmate Inc. All rights reserved.

This manual is also suitable for:

Ib32 sbc

Table of Contents