Foscam FN7108W-B4-1T User Manual page 71

NVR User Manual
Video Loss
When the video is lost, you can set an alarm message.
To enable motion detection, follow the steps below:
1 Channel---- Select the channel.
2 Action
 Send E-mail
If you want to receive alarm emails when video loss, you must select Send E-mail and set Mail
Settings first. Make sure you have set E-mail in "Device Setting -> Basic -> Mail" interface.

Buzzer
If you select this checkbox, when the video has been loss, the NVR will alert the buzzer.
OSD
This page is used to add time and device name on the video.
www.foscam.com 63