Foscam FN7104W-B4 User Manual
  1. Manuals
  2. Brands
  3. Foscam Manuals
  4. Security Camera
  5. FN7104W-B4
  6. User manual

Foscam FN7104W-B4 User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual
Model: FN7104W-B4
Version: 1.0

Advertisement

Table of Contents
loading

Related Manuals for Foscam FN7104W-B4

Summary of Contents for Foscam FN7104W-B4

  • Page 1 User Manual Model: FN7104W-B4 Version: 1.0...

  • Page 2: Table Of Contents

    2.4.3 Channel ..........................21 2.4.4 Record ..........................28 2.4.5 Alarm ............................ 32 2.4.6 Upgrade ..........................40 2.5 Phone monitoring ......................... 43 2.6 Screen ..........................44 2.7 Wire Network ........................45 2.8 Wireless Config ........................45 2.9 Manual Record ........................46 www.foscam.com...
  • Page 3 4.1 HDD Capacity Calculation ....................82 4.2 Common Operations ......................83 4.3 Specifications ........................88 4.4 FAQ ............................. 93 4.5 Glossary ..........................95 4.6 CE & FCC ........................... 96 4.7 WARRANTY ........................96 4.8 Statement ........................... 100 4.9 Obtaining Technical Support ....................101 www.foscam.com...

  • Page 4: Security Warning

    NVR User Manual Security Warning  Please change the password of your Foscam NVR App account, and NVR and cameras user name regularly. The password should contain a combination of numbers, letters and special characters.  Please keep the user name and password of your cameras, NVR and Foscam NVR App account safe.

  • Page 5: Preface

     Because the actual environment may be discrepant, the actual values of some data may be different from the values provided in the manual. If there are any question or dispute, the final interpretation of prevails.  If you do not follow the manual during operation, you will bear any loss caused thereof. www.foscam.com...

  • Page 6: Important Safety Instructions

     Please use suitable and professional hard disk to ensure continues and stable recording.  Lightning protection is needed when device is connected to communication cables. Ethenet cable which comes form outside, connecting to the wireless NVR directly is forbidden.  Check the power supply to avoid damage because of voltage mismatch. www.foscam.com...
  • Page 7 NVR User Manual  Make sure the wireless NVR working within suitable temperature and humidity environment. Short circuit may occur when dust become wet on circuit board. Please clean the dust on circuit board, connectors, and NVR case. www.foscam.com...

  • Page 8: Overview

    1.2 Key Features Network Monitoring You can access the NVR system remotely through the browser on a PC and Foscam APP, or access the NVR system locally by using the display or monitor. Multi-screen Preview Multi-screen preview indicates that several pages are displayed on the screen of the monitor based on the same scale.
  • Page 9 Support local GUI output and perform shortcut operations through the mouse (left click to select, right click to return to the previous menu).  Three roles can access the NVR, which are respectively visitor, operator, and administrator. The rights of the three roles vary from low to high. www.foscam.com...

  • Page 10: Relevant Version

    In the live view mode, there are icons at the right bottom of the screen for each channel, : NVR is recording for the IPC. : The alarm of the IPC is triggered.  The icon at the right top of the windows: Exit current menu to upper level menu. www.foscam.com...

  • Page 11: Common Operations

    Reset button: Press and hold it for 3 seconds to reset all parameters to factory defaults on the bottom of the NVR.  Local GUI: Right-click the mouse, Choose Menu > Manage > Maintain in the Menu interface, then click Restore device default in the Maintain interface. www.foscam.com...

  • Page 12: Usb Mouse Operation

    Time bar: Drag time bar. Live view: Moving channel arrangement order Right-Click Single-Click Live view: Show menu. Menu: Exit current menu to upper level menu. Note The Single-Click mentioned in this article is refer to the left mouse click. www.foscam.com...

  • Page 13: Gui

    By default, the Guide starts once the NVR has loaded. The Guide can walk you through some important settings of the NVR. If you don't want to use the Guide at that moment, right click the mouse to quit. www.foscam.com...
  • Page 14 NVR User Manual Time: Select the Time you need to set the Zone, time, NTP, Summer, etc.. Wire Network: Wire Network configure default, click Next. www.foscam.com...
  • Page 15 NVR User Manual Add device: Click next step, click , add device. www.foscam.com...
  • Page 16 NVR User Manual Disk: you can see Disk information, refresh and Format. Record Time: On this page you can select record time, as, All day, Daytime, Night and Custom. www.foscam.com...

  • Page 17: Shortcut Menu

    NVR User Manual 2.3 Shortcut Menu After login, right-click the mouse, you will enter the shortcut menu. IP Camera Click IP Camera to enter the IP Camera interface, On this page you can see device status such as www.foscam.com...
  • Page 18 [Enable Manual Record] Check the Channel checkbox, Click OK button to take effect. Right-click the mouse to back to the Live view interface. In the live view interface, there are icon at the right bottom of the screen for the channel. www.foscam.com...

  • Page 19: Menu

    Devices. Shutdown Click Shutdown to enter the Shutdown page. You can log out, reboot or shut down the NVR system. 2.4 Menu Right-click in live view mode and select Menu from the Shortcut Menu, the Menu interface is displayed. www.foscam.com...

  • Page 20: Manage

    Right-click in live view mode and select Menu > Manage in the Menu interface. The Manage interface is displayed. General Click General to enter the General interface, On this page you can change Language, resolution, Number, Transparence, Device Name, Standby time, Record, Tip Guide and NO Disk Remind. www.foscam.com...
  • Page 21 Click Time to enter the Time interface, On this page you can change Zone, Time, show, NTP, Server Port, Server IP, Interval, Summer time, Starting time and End Time. User Manage Click User Manage to enter the User Manage interface, On this page you can see User information www.foscam.com...
  • Page 22 Click Modify to enter the Modify User interface, On this page you can change user password and Authority Option. ▲Delete Click the Delete button to delete a user. ▲Add Click Add to enter the Add User interface, On this page you can Add to user, user password and Authority Option. www.foscam.com...
  • Page 23 Click Disk to enter the Disk interface, On this page you can see Disk information, refresh and Format. Click Log to enter the Log interface, The log record shows Recording time and accessed information. You can Click Query and Clear to query and clear the log records. www.foscam.com...

  • Page 24: Network

    In LAN, there are two ways for wireless NVR to connect to Internet. Manual setting: Fill in IP address, DNS data, and click Apply. DHCP: open DHCP, device will connect to Internet automatically, no need data setting. If user doesn’t familiar about the network environment, please prefer use DHCP first. www.foscam.com...
  • Page 25 NVR User Manual Wifi Click Wifi to enter the Wireless interface, On this page it will show you MAC address, Rate, SSID, SSID Password and Wifi Channel various information about your connected camera. www.foscam.com...
  • Page 26 If you would like to Access the NVR in Foscam App 1.you can simply go to the App Store or Google Play and search for the term "Foscam". Download the APP to your smartphone, or click Network > Mobile to enter the P2P interface scan the QR Code on the left, download the app, install.
  • Page 27 ▲HTTP port: By default, the HTTP is set to 80. Also, they can be assigned with another port number between 1 and 65535. But make sure they can not be conflict with other existing ports like 25, 21. ▲RTSP Port: The default port is 554 www.foscam.com...

  • Page 28: Channel

    You can configure the information of IP camera, Channel name, Image, Bridge, mask. IP camera Click IP Camera to enter the IP Camera interface, On this page you can see device status such as channel, IP, port NO, supports protocol Modify device, Remove and Add IP Camera. www.foscam.com...
  • Page 29 IPC to switch, and connect NVR to switch in WAN port. 3. Click Match Code, system will match the code between IPC and NVR. 4. When finished code matching, click Search, then select Add All. User also can click to add it and view picture www.foscam.com...
  • Page 30 Channel name Click Channel name to enter the Channel name interface, On this page you can see device status such as channel NO, IP, device name, Modify the name, change display name position and display time position. www.foscam.com...
  • Page 31 Image Click Image to enter the Image interface, On this page you can Adjust the image color mode of each monitor channel: Scene, Face, Infrared, Mirror, Bright, Contrast, Contrast, Saturation and Sharpness dafault. www.foscam.com...
  • Page 32 ① Check the bridging information Right click → Channel → Bridge. ② Then, bridging relationship will be showed on the interface automatically. ③ Picture above shows 2 auto bridging connect types One by one: CH1 → CH3 → NVR www.foscam.com...
  • Page 33 Mask This page is used to Adjust the occlusion area of the monitoring channel. 2. Click icon ∨ 1. Click Enable Allow On Screen Display Mask www.foscam.com...
  • Page 34 Double click mouse and return to the Mask page, click Apply to take effect. Back to the surveillance window, you can see the mask area as the following picture: www.foscam.com...

  • Page 35: Record

    You can configure the information of Playback, Record time and Backup. Playback Click Playback to enter interface is displayed. It supports single-screen or four screens. On this page you can view the record files stored in the hard disk. It supports single-screen or four screens. www.foscam.com...
  • Page 36 Fast backward. The fast backward speed can be 4 times, 8 times or 16 times of the normal playing speed. Click this button. The multiple of normal playing speed is displayed in the lower left corner of the fast backward icon. For example, indicates the current fast backward speed is twice times of www.foscam.com...
  • Page 37 Click Record Time to enter Record Time interface. On this page you can select record time, as, All day, Daytime, Night and Custom. All day: 24 hours record Daytime: 8:00-20:00 record Night: 20:00-The next day 8:00 record. Custom: You can select the Channel, date and time, Video type manually. www.foscam.com...
  • Page 38 Note: If target file can not be searched out, please click Empty → Add. Please remove the fles which is no need before backup. Ensure insert device (like USB) in 45 second, as system reserved searching time for it is 45 second. www.foscam.com...

  • Page 39: Alarm

    You can configure the information of MotionDetect, Shelter, Video loss and Local alarm. Motion Detect Click Motion Detect to enter the Motion interface, On this page you can setting Channel Enable, Sensitivity, Detection area, Alarm mode, Linkage and Set Time. www.foscam.com...
  • Page 40 Step 3: Detection area----Set detection area----Click set Detect area and it pop up a window, then you can draw the detection area. Click right mouse click after settings. When something moving in the detection area, the NVR will alarm. www.foscam.com...
  • Page 41 Step 5: Set Time---- Select the week day date and set time, For example, select Wed and time: 00:00-23:00, that means during Wed 00:00-23:00, when something moving in the detection area, the NVR will alarm. www.foscam.com...
  • Page 42 Step 8: Copy---- If you want to set other channels to be the same, you can click the "Copy" button. Note: You must set the detection area and detection schedule, or else there is no alarm anywhere and anytime. Please ensure all settings are completed alarm function will take effect. www.foscam.com...
  • Page 43 Click Shelter to enter the Shelter interface, On this page you can setting Channel Enable, Sensitivity, Detection area, Linkage and Set Time. Shelter---Lens shelter alarm. When the lens is blocked by more than half, the alarm will be triggered. Select the alarm method to improve safety. www.foscam.com...
  • Page 44 Step 4: Set Time---- Select the week day date and set time, For example, select Wed and time: 00:00-23:00, that means during Wed 00:00-23:00, when something moving in the detection area, the NVR will alarm. www.foscam.com...
  • Page 45 Step 8: Copy---- If you want to set other channels to be the same, you can click the "Copy" button. Video loss Click Video loss to enter the Videoloss interface, On this page you can setting Channel NO and Linkage www.foscam.com...
  • Page 46 Copy---- If you want to set other channels to be the same, you can click the "Copy" button. Local Alarm Click Local Alarm to enter the Local Alarm interface, On this page you can setting Alarm Type and www.foscam.com...

  • Page 47: Upgrade

    NVR will hear beep alarm sound. 2.4.6 Upgrade Right-click in live view mode and select Menu > Upgrade in the Menu interface. The Upgrade interface is displayed. You can configure the information of Sys version, NVR upgrade and IPC upgrade. www.foscam.com...
  • Page 48 You can view the Product ID, Product model, System Version and Release Date. NVR upgrade Download the frmware to the U disk → Insert U disk to NVR USB port → Right-click→ Menu → Upgrade→ NVR Upgrade → click Start to upgrade your NVR. www.foscam.com...
  • Page 49 Download the frmware to the U disk → Insert U disk to NVR USB port Choose → Right-click→ Menu → Upgrade→ IPC Upgrade in the Menu interface. The IPC update interface, you can choose Search, All upgrade and All recovery default. www.foscam.com...

  • Page 50: Phone Monitoring

    All recovery default---- Click this button, all the IP cameras recovery default 2.5 Phone monitoring Right-click in live view mode and select Phone monitoring from the Shortcut Menu, the P2P interface is displayed. Please refer to 2.4.2 Network > Mobile www.foscam.com...

  • Page 51: Screen

    NVR User Manual 2.6 Screen Right-click in live view mode and select Screen from the Shortcut Menu, you can choose single-screen or four screens. www.foscam.com...

  • Page 52: Wire Network

    Right-click in live view mode and select Wire Network from the Shortcut Menu, the Wire Network interface is displayed. Please refer to 2.4.2 Network > Wire. 2.8 Wireless Config Right-click in live view mode and select Wireless Config from the Shortcut Menu, the Wireless interface is displayed. Please refer to 2.4.2 Network > Wifi www.foscam.com...

  • Page 53: Manual Record

    Right-click in live view mode and select Manual Record from the Shortcut Menu, the Manual Record interface is displayed. you can selection channel Manual Record. 2.10 Playback Right-click in live view mode and select Playback from the Shortcut Menu, the Playback interface is displayed. Please refer to 2.4.4 Record > Playback www.foscam.com...

  • Page 54: Image Color

    Patrol turning a channel cruise playback interface every 6 seconds. Step 3: Mode---- 1 Split 2.13 Guide Right-click in live view mode and select Guide from the Shortcut Menu, the Guide interface is displayed. Please refer to 2.2 Guide www.foscam.com...
  • Page 55 Note: After you have logged out the system, menu operation on the screen is invalid. It is required to input a user name and password to unlock the system. Reboot: Choose Reboot, then click Reboot in the System interface. Click OK button in the pop-up www.foscam.com...
  • Page 56 NVR system will reboot Power: Choose Power, then click Power in the System interface.Click OK button in the pop-up message box, the NVR system will shut down. Note: It is recommended that cut off the power after shutting down www.foscam.com...

  • Page 57: Web

    NVR by using the search tool. Here we take search tool as an example. Step2 Visit Foscam official website foscam.com/tools, then you can find the “SearhTool-only for FN7104W”, download the tool to your computer, the icon shows as below: Step3 Enable the DHCP feature of your router, then open the Equipment Search Tool program.
  • Page 58 After installing the add-on, refresh the browser and enter the login interface. Input the follow parameter. Parameter Description User name / The user name and password of the NVR client. Password The default username / password will then become admin / random password www.foscam.com...
  • Page 59 Select the language type of the NVR client. Step6 Click Login button. When you log in for the first time, it will come to the operating of modify the user name and password automatically. Enter the New User name, New password and Confirm the password. -------End www.foscam.com...

  • Page 60: Live Video

    NVR User Manual 3.3 Live Video After log in, the live view interface will display. You can configure the play / stop the live view, manual recording, manual capturing, preset, cruise, led, color and so on. www.foscam.com...
  • Page 61 Step7 1 Channel Click this button, It will display one channel in the live view interface. 4 Channels Click this button, It will display four channels in the live view interface. Play all Play monitoring videos in all channels. www.foscam.com...

  • Page 62: Parameter Configuration

    NVR provide a function of auto searching IP camera. When there are supplied IP cameras in the same network segment of a LAN with NVR, you may add it in one button with IP Camera's user name, password and port number. www.foscam.com...
  • Page 63 Choose the IP Camera in the list of 'The Current LAN IPC List' . Choose the Protocol from the drop list. Input the User Name and Password of the IPC. Select the FOSCAM protocol for Foscam brand IPC, and select the ONVIF protocol for other brands IPC.

  • Page 64: Schedule Record

    -------End 3.4.3 Alarm Motion Detection Follow the steps to set the motion detection parameters. In the live view mode, once a motion detection event takes place, the NVR can analyze it and perform many actions to handle it. Enable www.foscam.com...
  • Page 65 The higher the sensitivity, the NVR will be more easily alarmed. The Detection Interval time between two motion detection. Step4 Check the checkbox to select the linkage method. You may refer to follow table for details of linkage methods. www.foscam.com...
  • Page 66 IPC Buzz around the camera will hear beep alarm sound of the IPC. Step5 Set Detection Area 1．Click Set Detection Area button and it pop up a window. 2．Drag and draw the area for motion detection by left mouse. www.foscam.com...
  • Page 67 For example, click TUE, the all column of TUE turns to red, that means during Tuesday whole day, when something moving in the detection area, the camera will alarm. Click here  Choose the Certain Time Period Press the left mouse and drag it on the time boxes, you can select the serial area. www.foscam.com...
  • Page 68 (Parameter Configuration) > Alarm > Other Alarm, The Other Alarm page is displayed. Step2 Select Type form drop-down box list. Step3 Check the Buzzer checkbox if you want to enable buzzing sound of the NVR device. Step4 Click Save button to take effect. -------End www.foscam.com...

  • Page 69: Device Information

    You can change your NVR name. System Firmware Version Display the system version of your NVR. Application Firmware Version Display the application firmware version of your NVR. Plug-in version Display the plug-in version of your NVR. Click Save button to take effect. www.foscam.com...
  • Page 70 (Parameter Configuration) > Device Information > System Log. The System Log page is displayed. The operation, alarm, exception and information of the NVR can be stored in log files, which can be searched and viewed at any time. The Log Type contains Alarm log, System log and Operation log. www.foscam.com...

  • Page 71: Basic Settings

    3.4.5 Basic Settings System Time You can configure the date and time of the NVR. Step1 Choose (Parameter Configuration) > Basic Settings > System Time. The System Time page is displayed. Step2 Configure the system time of the NVR. www.foscam.com...
  • Page 72 NVR system with your computer. Date Format Select the date format from the drop-down list. Time Format Select the time format from the drop-down list. Step6 Click Save button to take effect. -------End Network You can configure the network information of the NVR. www.foscam.com...
  • Page 73 NVR User Manual Step1 Choose (Parameter Configuration) > Basic Settings > Network.The Network page is displayed. www.foscam.com...
  • Page 74 UPnP function of the router to which your NVR is connected. How to configure the IP Address, Subnet Mask, Gateway, Preferred DNS Server, Alternative DNS Server, please refer to 4.2 Common Operations > 2. Configure the IP Parameters. Step3 Click Save button to take effect. -------End www.foscam.com...
  • Page 75 SMTP mail server. The network must also be connected to either an intranet or the Internet depending on the location of the e-mail accounts to which you want to send notification. Step1 Choose (Parameter Configuration) > Basic Settings > Email. The Email page is displayed. www.foscam.com...
  • Page 76 Sender The Email address of sender. Receivers Address1/2/3/4 The Email address of user to be notified. you can set 4 receivers Step3 Click Save button to take effect. Step4 Click Test to see if Mail has been successfully configured. www.foscam.com...
  • Page 77 Default port is 21. If changed, external FTP client program must change the FTP Port server connection port accordingly. FTP Mode Here supports two modes: PORT and PASV. FTP Username The user account of FTP server. FTP Password The user password of FTP server. Step3 Click Save button to take effect. www.foscam.com...
  • Page 78 If the test success, you can see the success information. -------End DDNS The Foscam NVR has embedded a unique DDNS domain name when producing, and you can directly use the domain name, you can also use the third party domain name. Choose (Parameter Configuration) >...
  • Page 79 You can use the mouse to click and drag the text frame on the live view window to adjust the OSD position. Step5 Click Save button to finish the mask area setting. The mask area will be marked with black. -------End Video Encode Choose (Parameter Configuration) > Basic Settings > Video Encode. The Video Encode page is displayed. www.foscam.com...
  • Page 80 You should choose a lower frame rate when the bandwidth is limited. Normally, when the frame rate above 15, you can achieve fluently video. Click save button to take effect. Storage Location You can configure the storage location for snap picture and backup record file. www.foscam.com...

  • Page 81: System Management

    You can add, modify, delete username / password or distribute authority for users. The valid value range of Username and Password is 1 ~ 20 characters, it contains the English letter, numeric and symbol. Choose (Parameter Configuration) > System Management > User Account. The User www.foscam.com...
  • Page 82 2．Click Save button to take effect. Import / Export Configurations You can import or export a configuration file for NVR system. Choose (Parameter Configuration) > System Management > Import / Export Configuration. The Import / Export Configurations page is displayed. www.foscam.com...
  • Page 83 Do not disturb the update process by turning off the power.  All current settings will be overwritten when importing a configuration file. If a bad configuration file is uploaded the NVR may not work. Upgrade Choose (Parameter Configuration) > System Management > Upgrade. The Upgrade page is displayed. www.foscam.com...
  • Page 84 Patch Installation Choose (Parameter Configuration) > System Management > Patch Installation. The Patch Installation page is displayed. You can install or install patch of the NVR. Click Browse to select the patch file in the local directory. www.foscam.com...
  • Page 85 (Parameter Configuration) > System Management > Reboot. The Reboot page is displayed. Click Reboot button, then click OK button in the pop-up message box. The NVR system will reboot. Auto Restore Choose (Parameter Configuration) > System Management > Auto Restore. The Auto Restore page is displayed. www.foscam.com...

  • Page 86: Playback

    You can configure the Date and Time. The NVR system will be maintained at the setting time. 3.5 Playback Choose (Playback), you can play the recording file of the NVR. 1. Select a date with recording in calendar. 2. Select the Record Type, and check the checkbox from the Channels. www.foscam.com...
  • Page 87 You can set the storage path, refer to the Web > Parameter configuration > Settings > Storage Location. Click this button to enabled/disabled the audio. Full screen. Make the playing video maximized. After the video is maximized, www.foscam.com...
  • Page 88 NVR User Manual press ESC to exit full screen. 5. Playback time You can move the mouse to a specific time axis and click to watch the playback. Icon Description Zoom-in time axis. Zoom-out time axis. www.foscam.com...

  • Page 89: Appendix

    If you select 4M for the bit rate and select four channels for recording and one week of recording is needed, you can calculate the HDD capacity by using the following formula: Recording time(hour) =7days*24 hours=168 hour Mbit  3600 Spent of HDD Capacity per hour(M/hour)= =1800M/hour www.foscam.com...

  • Page 90: Common Operations

    User can also use third part DDNS, such as www.no-ip.com, www. 3322.com Here take www.no-ip.com for example: Step 1, Go to the website www.no-ip.com to create a free hostname Firstly: Login on www.no-ip.com and click No-IP Free to register. www.foscam.com...
  • Page 91 After registration, please login your email which used to register. You will receive an email from website, please click the link to activate your ACCOUNT as indicated in email. Secondly: Login the link with the registered username and password to create your domain name. www.foscam.com...
  • Page 92 DDNS and the Domain Name cannot work at the same time, the last time you configured will take effect. Do port forwarding within the router Example: The camera's LAN IP address is http://192.168.8.100:2000 , Media port no. is 9200. www.foscam.com...
  • Page 93 The IP address of the NVR must be in the range of the router address pool. Log in to the router client through the browser and select DHCP Server > DHCP service. On the DHCP page, you can view the start address and end address of the address pool. www.foscam.com...
  • Page 94 The subnet mask of the NVR must be the same as the subnet mask in LAN port status. The default gateway of the NVR is the same as the IP address in LAN port status. The preferred DNS and alternative DNS can be the same as the DNS in WAN port status. www.foscam.com...

  • Page 95: Specifications

    H.264 Format Synchronous 4 channels 720P synchronous video playback Playback Playback Playback Mode Fast forward / Fast backward / Frame forward / Slow Play Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n Network Frequency bands 2412-2472MHz Maximum power 16dBm www.foscam.com...
  • Page 96 Power Supply DC 12V/2A Dimension (L * W * 234mm * 234mm * 52mm (9.2in * 9.2in * 2.0in) Physical and Environmental Net Weight 660g (1.5lb) Operating º C ~ 55 º C (-4º F ~ 131º F) Temperature www.foscam.com...
  • Page 97 IR Range 20m (65ft) Lens Infrared Mode Automatic or manual View Angle 62º Ethernet One 10/100Mbps RJ45 port Wireless Standard IEEE802.11b/g/n IEEE802.11b: 11Mbps (Max.); Data Rate IEEE802.11g: 54Mbps (Max.); Network IEEE802.11n: 150Mbps (Max.). Frequency bands 2412-2472MHz Maximum power 18dBm www.foscam.com...
  • Page 98 FCC, IC, CE, RoHS, IP66 Operating º C ~ 60 º C º F ~ 140 º F Temperature Operating Humidity 10% ~ 80% non-condensing Storage º C º C º F º F ~ 60 ~ 140 Temperature www.foscam.com...
  • Page 99 NVR User Manual Storage Humidity 0% ~ 90% non-condensing www.foscam.com...

  • Page 100: Faq

    In this case, log out of the Web client and log in to it again. In similar cases, for example, changing the IP address and HTTP port of the NVR, you need to log in to the client again. www.foscam.com...
  • Page 101 11. Why does the Web client prompt the message "Plugins are not found, Click me to download" or "Find a new Plugins, Click me to download" after installing plug-in? You need to close the current browser after installing the plug-in, and then open the browser to access the login page. www.foscam.com...

  • Page 102: Glossary

    Network Time A protocol designed to synchronize the clocks of computers over Protocol a network. Network Video A NVR can be a PC-based or embedded system used for Recorder centralized management and storage for IP cameras. www.foscam.com...

  • Page 103: Ce & Fcc

    4.7 WARRANTY FOSCAM values your business and always attempts to provide you the very best of service. No limited hardware warranty is provided by FOSCAM unless your Foscam product ("product") was purchased from an authorized distributor or authorized reseller.
  • Page 104 NVR User Manual returned to an authorized return center in the region where the product was first shipped by FOSCAM or to the point-of-purchase, which may have regional specific warranty implications. If you purchase your Foscam product from online store, please contact the point-of-purchase and ask for return / replacement / repair service.
  • Page 105  Warranty is void if damaged by the use of parts not manufactured or sold by FOSCAM.  Damage caused by improper installation of third-party products.
  • Page 106 Foscam, shall be the repair or replacement of defective parts. If Foscam lists a product on its website specification in error or that is no longer available for any reason, Foscam reserves the right to explain it without incurring any liability.

  • Page 107: Statement

    Without the prior written permission of my company, all the contents of relevant operating instructions manual affiliated to the product must not be reproduced, transmitted, transcribed or stored in a retrieval system, or translated into other languages. Our company will reserve the right to improve and modify the product and corresponding manuals. www.foscam.com...

  • Page 108: Obtaining Technical Support

    While we hope your experience with the NVR is enjoyable and easy to use, you may experience some issues or have questions that this User's Guide has not answered. If you have problem with device, please first contact reseller for solving the problems. If our reseller cannot provide service, please contact our service department: support@foscam.com www.foscam.com...

Table of Contents