Foscam FN7108W-B4-1T User Manual page 60

NVR User Manual
System firmware version: Display the system firmware version of your NVR.
Application firmware version: Display the application firmware version of your NVR.
MAC ID: Display the MAC address of your NVR. For example Device ID is 0049838BFD2D,
the same MAC ID sticker is found at the bottom of the NVR.
Device time
This section allows you to configure the settings of the internal system clock for your
camera. You can set the time zone, device time, date format.
Time zone: Select the time zone for your region from the drop down menu.
Synchronize time to the device: After checking the Synchronize time to the device
checkbox, you can set the device time, or click the Sync with PC/terminal button to
synchronize the PC/terminal time to your device.
Sync with NTP server: Network Time Protocol will synchronize your device with an
Internet time server. Choose the one that is closest to your device.
Use DST: Select the use DST (Daylight Saving Time, to set the clock ahead of the
real-time), then set the start time and end time of the DST, select the daylight saving time
from the drop-down menu at last.
Click Save button and submit your settings.
www.foscam.com 52