Foscam FN7108W-B4-1T User Manual page 16

NVR User Manual
1. Setting the system time, date format, language, resolution of the monitor and so on.
2. Format HDD.
Click the Format button to set up the HDD. Note that this will delete all files on the HDD.
HDD Full Setting. Select Stop Record or Overwrite.
Note
Only FN7108W-B4-1T kit has a 1T hard drive installed at the factory.
3. Network
You can set up the network information for the NVR.
4. P2P.
If you want to know the UID of the device, please scan the QR code. If you don't want to
use the Setup Wizard next time, check Not show again checkbox. Click the Finish
button to complete the setup wizard.
www.foscam.com 8