Count-down function
1) If necessary, press the "M" and "S" buttons simultaneously (=RESET) to reset
the timer
2) Press the buttons "M" and "S" to set the time in minutes and seconds. The
timer goes up to
Press and hold the buttons to scroll through the digits faster.
3) Press the "START/STOP" button to start the count-down.
NOTE
►
You can stop the count-down at any time by pressing any button. To continue
the count-down, press the "START/STOP" button.
4) As soon as the set time has elapsed, you will hear several beeps. The dis-
play shows the last set time.
NOTE
►
You can stop the alarm signal at any time by pressing any button.
When you press the "START/STOP" button, the display shows the last set
time.
Press the buttons "M" or "S" to reset the timer
►
The heating element
Pay attention to the signal tone from the timer
food.
Count-up function
1) If the display shows the last set time, simultaneously press the buttons "M"
and "S" (=RESET) to reset the time.
2) To start the count-up, press the "START/STOP" button.
NOTE
►
You can stop the count-up at any time by pressing any button. To continue
the count-down, press the "START/STOP" button.
SKF 2800 B3
.
:
(min/sec).
does NOT switch off when the countdown finishes!
to
:
.
to avoid spoiling the
GB │ IE
│
37
■