Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
APPENDIX
Upgrading Your Machine's Software
You can use a computer to download software upgrades for your sewing machine.
Memo
While the software is being upgraded, the buzzer will not sound when a key is pressed.
While holding
a
turn on the machine.
The following screen appears.
b
Plug the USB cable connectors into the
corresponding USB ports on the computer and
on the machine.
The "Removable Disk" icon appears in "My
Computer" on the computer.
c
Copy the upgrade file to "Removable Disk".
The message "Connected to PC. Do not
disconnect the USB cable." appears.
192
(Settings key) pressed,
When the screen shown in step
d
again, press
The message "Saving the upgrade file. Do
not turn main power to OFF." appears.
e
When the following screen appears, upgrading
is completed.
If there are two upgrade files, download the
second file. Repeat steps
Note
If an error occurred, an error message
appears. At this time, turn the machine off,
and then start the procedure again from step
a
.
f
Disconnect the USB cable, and turn the
machine off, then on again.
a
appears
.
c
e
through
.
Advertisement
Table of Contents
