Free-Motion Quilting - Brother NV1200 Operation Manual

Brother computerized sewing and embroidery machine operation manual
Hide thumbs Also See for NV1200:
Table of Contents

Advertisement

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
UTILITY STITCHES
■ Using the quilting guide
Use the quilting guide to sew parallel stitches that
are equally spaced.
Insert the stem of the quilting guide into the
a
hole at the rear of the walking foot or presser
foot holder.
Walking foot
Presser foot holder
Adjust the stem of the quilting guide so that
b
the guide aligns with the seam that has already
been sewn.
108

Free-motion quilting

With free-motion quilting, lower the feed dogs (using
the drop feed lever) so that the fabric can be moved
freely in any direction.
When free-motion quilting, use the following
instructions with the quilting foot.
a
Remove the presser foot and the presser foot
holder.
• Refer to "Removing and attaching the presser
foot holder" (page 44).
b
Secure the quilting foot with the presser foot
holder screw.
The pin on the quilting foot should be
positioned over the needle clamp screw.
2
a Pin on quilting foot
b Presser foot holder screw
c Needle clamp screw
c
Hold the quilting foot in place with your right
hand, and then tighten the presser foot holder
screw using the screwdriver in your left hand.
1
a Presser foot holder screw
1
3

Advertisement

Table of Contents
loading

Table of Contents