Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
■ LCD button
When a specific pattern is selected,
press this key and then, press
sewing settings such as the specified
alphabet character string and color
are confirmed.
Press this key to change the thread
settings.
Press this key to adjust the pattern.
to switch the display. The
Press this key to select or cancel
programmed thread cutting.
Press
or
to adjust the thread
tension.
Press
or
to change the
thread density (character patterns
only).
Press this key when you want to
change the color character by
character in character embroidery.
Since the sewing machine stops at
the end of each character, the upper
thread is changed as you sew.
Press this key again to cancel multi-color.
The needle progresses one color or
one stitch (if pressed continuously, 9
stitches to 20 stitches) at a time and
changes the position for starting the
embroidery. This is used when a
specific color is not sewn or when
restarting the sewing machine after
power has been turned off in the
middle of the operation.
Back one
color
Back one
stitch
• For details, refer to "Resewing" (page 172).
The position of the pattern within the
embroidery frame can be checked,
and the size and angle can be
changed.
• For details, refer to "Adjusting the layout"
(page 169).
Memo
Keys that appear surrounded with a dotted
line cannot be used.
Selecting Embroidery Patterns 159
4
Forward
one color
Forward
one stitch
Advertisement
Table of Contents
