Table of Contents
Advertisement
— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
GETTING READY
Removing and attaching the
presser foot holder
Remove the presser foot holder when cleaning the
sewing machine or when installing a presser foot that
does not use the presser foot holder, such as the
embroidery foot and quilting foot. Use the
screwdriver to remove the presser foot holder.
a
Remove the presser foot.
• For details, refer to "Replacing the presser
foot" (page 42).
b
Use the screwdriver to loosen the presser foot
holder screw.
a
a Screwdriver
b Presser foot holder
c Presser foot holder screw
■ Attaching the presser foot holder
Raise the presser foot lever.
a
b
Align the presser foot holder with the lower-
left side of the presser bar.
44
b
c
Hold the presser foot holder in place with your
c
right hand, and then tighten the screw using
the screwdriver in your left hand.
1
a Screwdriver
Note
If the presser foot holder is not correctly
installed, the thread tension will be
incorrect.
Advertisement
Table of Contents
