Scosche FD5000SW Manual page 9

STEERING WHEEL WIRING CODES
1. Prepare FD5000SW steering wheel connector by using the chart below.
2. Connect the harness to the interface module.
3. For Alpine, Clarion, JVC, Panasonic and car stereos, connect the 3.5mm
male steering plug into the steering wheel input jack at the back
of the stereo.
4. For Kenwood and newer JVC stereos, connect the BROWN
wire from the steering wheel harness to the REMOTE IN
wire at the back of the stereo.
STEREO BRAND
ALPINE
CLARION
JVC
KENWOOD
PANASONIC
SONY
PIONEER
OTHER BRANDS
*NOTE: Cut wire ONLY. DO NOT remove!
CONFIGURATION*
Cut Green loop
Cut Violet loop
Cut Green & Violet loop
Cut Orange & Green
Cut Orange
Cut White
No cut required
Call Tech Support
STEREO CONNECTION
3.5mm
3.5mm
3.5mm or Brown (Key 1)
Brown (Key 1)
Brown (Key 1)
3.5mm
3.5mm
Brown, Gray, Black
9