Stopping While Embroidering - Brother NV1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Stopping while embroidering

If the embroidery is stopped before it is complete,
check the current needle count before turning off the
sewing machine.
Memo
When the sewing machine is turned off, the
embroidery size and layout return to the
original setting.
a Press
sewing machine.
b Check the current needle count on the screen
and make a note of it.
If the needle count is not displayed, press
(Settings key), and then use
the following screen.
Press
embroidery screen.
(Start/stop button) to stop the
(Back key) to return to the
c Press
The confirmation message is displayed.
d Press
The selected pattern is turned off, and it
returns to the initial embroidery screen.
e Turn off the sewing machine.
to display
• Always detach the embroidery unit when you
move the sewing machine.
f Turn on the sewing machine and select the
pattern.
g Press
(Embroidery key).
.
.
Editing and Saving Patterns 161
4