Brother NV1000 Operation Manual page 142

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
d Tighten the adjustment screw by hand just
enough to secure the fabric.
e Gently remove the fabric from the frame
without loosening the adjustment screw.
Memo
This precautionary step will help reduce
pattern distortion while embroidering.
f Press the inner frame in from the top of the
fabric again, lining up
and on outer frame.
a Outer frame
b Inner frame
c Fabric (right
d Stabilizer material
e Ledge of outer frame
• Press down firmly until the inner frame is
securely pressed against the ledge of the
outer frame.
on the inner frame
3
1 2
5 4
side
)
g Tighten the adjustment screw while removing
any slack in the fabric by hand. The goal is to
have a drum-like sound when the stretched
fabric is struck lightly.
■ Using embroidery sheets
If the embroidery sheet attached to the
embroidery frame is used, the embroidery can be
sewn in exactly the right position on the fabric.
Make a mark with a chalk pen at the center of
a
the position for the pattern to be embroidered.
a Embroidery pattern
b Mark
Preparing the Fabric 141
4
1
2