Entering The Pattern Data - Brother NV1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Entering the pattern data

Follow the pattern drawn on the grid sheet and
program the pattern into the sewing machine.
a Attach monogramming foot "N".
• For details, refer to "Replacing the presser
foot" (page 42).
b Press
panel, and then press
The screen for selecting pattern types is
displayed.
c Select
The screen for entering a pattern appears.
d Check the grid sheet set, and specify the
coordinates of the first point.
Specify the coordinates using
press
(Utility stitch key) on the operation
.
.
.
e Specify whether single stitching or triple
stitching will be sewn between the points.
triple stitching.
f Specify the coordinates of the second point,
and then press
g Repeat steps
point.
• If you make a mistake entering a point, press
• To correct the content entered, press
You can insert, delete and move points.
h After all points have been entered, press
, and
The embroidery screen appears.
Designing a Pattern (My Custom Stitch) 125
is single stitching, and
.
e f
through to specify each
, and the previous point is erased.
gives
3
.
.