Appliquéing - Brother NV1000 Operation Manual

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —
EMBROIDERY
Appliquéing
Prepare the base fabric and the appliqué fabric
(appliqué piece).
a Select an appliqué pattern.
b When "APPLIQUE MATERIAL" is displayed on
the screen, apply iron-on stabilizer to the back
of the appliqué piece fabric, and stretch it on
the embroidery frame.
c Lower the presser foot lever, and press
(Start/stop button).
The cut-out for the appliqué piece is sewn,
and the sewing machine stops.
a Cut-out line
b Appliqué piece fabric
"APPLIQUE POSITION" will be displayed on
the screen.
154
1
2
d Remove the fabric from the embroidery frame,
and cut it out along the cut-out line
Cut carefully along the stitching and remove
the thread.
• If it is not cut right on the stitching, it will not
be finished neatly.
e Stretch the base fabric on the embroidery
frame.
f Set up the thread for appliquéing.
Lower the presser foot lever, and press
g
(Start/stop button).
The position for the appliqué is stitched, and
the sewing machine stops.
a Appliqué position
b Base fabric
"APPLIQUE" will be displayed on the screen.
h Apply a thin layer of fabric glue or spray
adhesive to the back of the appliqué piece, and
attach it in the appliqué position.
1
2